Main Page
From NesevoWiki
Help
You can read the introduction to MediaWiki Syntax in german or english. Additionally, you can consult the help pages provided by the WikiMedia Foundation and by mediawiki.org, the developers of this software. There's also help regarding the transformation of Microsoft Office documents (german).
Resetting / changing passwords
- Password Recovery Procedure for Cisco Routers
- Password Recovery Procedure for Cisco Switches
- Password Recovery Procedure for Cisco Secure Pix
- Standard Break Key Sequence Combinations During Password Recovery
- Password Recovery Procedure for the Catalyst 6500 with Supervisor 720 (WS-SUP720 / WS-SUP720-3B / WS-SUP720-3BXL) Running Cisco IOS Software Prior to 12.2(17)SX
- Password Recovery for Cisco ASA 5500 Series
Loading IOS
- Loading IOS on a Switch or Router
- Loading IOS from a Switch or Router to your PC
- Loading IOS on a switch or router via the console
- Loading IOS on a Sup32
- Loading IOS on a WS-C4900M / loading IOS and configuring the management interface via VRF / virtual router forwarding
- Loading IOS on Metro switches (e.g. ME-3400G-12CS-A)
- Loading IOS on ASA devices (e.g. ASA5510)
- Loading IOS on Access Server (e.g. AS2509-RJ, AS2511-RJ)
- Loading IOS on a Nexus 7000/5000
Telling the difference
- The difference between a PC, SPC, UPC and APC finish on a fiber optic connector and which one you should choose
- The difference between a singlemode and a multimode fibre patchcord
- The difference between a SC/PC and SC/APC adapter
Power supply
- PWR-950-AC
- PWR-950-DC
- PWR-1400-AC
- PWR-1500-DC
- PWR-1900-AC/6
- PWR-1900-DC
- PWR-2700-AC for Cisco7606
- PWR-2700-AC/4 for Cisco7604 and WS-C6504-E
- PWR-2700-DC
- PWR-4000-DC
- PWR-6000-DC
- PWR-7200-DC / PWR-7200-DC+
- WS-CAC-1000W
- WS-CAC-1300W
- WS-CDC-1300W
- WS-CAC-2500W
- WS-CDC-2500W
- WS-CAC-3000W
- WS-CAC-4000W-US
- WS-CAC-4000W-INT
- WS-CAC-6000W
- WS-CAC-8700W
- WS-CAC-8700W-E
- CAB-7513-ACE / CAB-AC-2500W-EU
- Internal Power supply partnumbers for cisco catalyst switches
- Internal Power supply partnumbers for cisco routers
- Internal Power supply partnumbers for cisco PIX firewalls and ASA devices
- Internal Power supply partnumbers for cisco Access Server
RPS / Redundant Power System
Power cables and power cable connectors overview
- general overview on power cable connectors
- cisco power cable partnumbers and their connectors
- matching power cables for cisco powersupplies
Cisco routers
- Specifications
- Routermemory
- Router Module Crossref
- Router Performance Matrix
- CISCO INTEGRATED SERVICE ROUTERS
- Network Module Slots Available on Cisco Access Routers
Cisco ASR 1000 series
- Cisco ASR 1013 Router
- Cisco ASR 1006 Router
- Cisco ASR 1004 Router
- Cisco ASR 1002 Fixed Router
- Cisco ASR 1002 Router
- Cisco ASR 1001 Router
Cisco ASR 9000 series
- Installing IOS from ROMMON
- Cisco Support Forum (Step-by-Step)
- Official Cisco Documentation
- In short
- Connect to the Console Port
- Get to ROMMON prompt (sometimes you have to hit CTRL-C whan asked)
- Connect Mgmt0 port to the network
- Place the vm File of your ASR IOSXR distribution (e.g. @@asr9k-mini-px.vm-4.3.0@@, normally found within the tar file of your distribution) onto your TFTP server
- Issue the following commands from the ROMMON promt (bold values may have to be replaced acording to your environment):
unset BOOT
unset TFTP_FILE
sync
unset BOOT_DEV_SEQ_OPER
unset MIRROR_ENABLE
sync
priv
diswd
IP_ADDRESS=192.168.1.241
IP_SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=192.168.1.254
TFTP_RETRY_COUNT=4
TFTP_TIMEOUT=6000
TFTP_CHECKSUM=1
TFTP_SERVER=192.168.1.11
TFTP_MGMT_INTF=0
TFTP_BLKSIZE=1400
Cisco 2600 series routers
Cisco 7200 series routers
- Port Adapter Compatibility for Cisco 7200 VXR Routers
- the difference between a PA-2FE-TX and a PA-2FE-TX-ISL
Cisco 7600 series routers
- Cisco7603 and Cisco7603-S routers
- Cisco7604 router
- Cisco7606 and Cisco7606-S routers
- Cisco7609 and Cisco7609-S routers
- Cisco7613 router
- Cisco7600 Chassis Dimensions and Weights
Cisco switches
Cisco 6500 series switches
- Cisco Catalyst 6503 and Cisco 6503-E
- Cisco Catalyst 6504-E
- Cisco Catalyst 6506 and Cisco 6506-E
- Cisco Catalyst 6509 and Cisco 6509-E
- Cisco Catalyst 6509-NEB and Cisco 6509-NEB-A
- Cisco Catalyst 6509-V-E
- Cisco Catalyst 6513
- Cisco Catalyst6500 Chassis Dimensions and Weights
- Cisco Catalyst6500 Power cord details and connectors
Cisco Nexus Switches
Nexus N5K-C5000 series switches
Nexus N5K-C5548P-FA and N5K-C5548UP-FA switches
Nexus N2K-C2000 series switches
Nexus N2K-C2248TP and N2K-C2248TP-E switches
there are two different options for the N2K-C2248 nexus switch. The standard version (N2K-C2248TP / N2K-C2248TP-1GE) and an enhanced version (N2K-C2248TP-E / N2K-C2248TP-E-1GE). the difference is the buffer memory size of 32MB for the enhanced version.
both versions appear with two partnumbers basically describing the same part.
the config partnumers leaving you the airflow options (N2K-C2248TP / N2K-C2248TP-E) and the chassis partnumbers (N2K-C2248TP-1GE / N2K-C2248TP-E-1GE):
N2K-C2248TP = N2K-C2248TP-1GE (48x100/1000-T+4x10GE), airflow/power option
N2K-C2248TP-E = N2K-C2248TP-E-1GE (48x100/1000-T+4x10GE), airflow/power option
supervisor engines (SUP) / route switch processors (RSP) / performance route processors (PRP)
- Cisco catalyst 6000 / 6500 series supervisor engines
- forwarding engines / multilayer switch feature cards (MSFC) and routing engines / policy feature cards (PFC)
- WS-SUP720-3BXL
- RSP720-3C-GE / RSP720-3CXL-GE
WS-X6K-S2U-MSFC2
WS-SUP720-3BXL
- WS-SUP720-3BXL memory locations
- WS-SUP720-3BXL memory upgrade options
- WS-SUP720-3BXL power requirement
- WS-SUP720-3BXL daughter cards
WS-SUP720-3B
- WS-SUP720-3B memory locations
- WS-SUP720-3B memory options
- WS-SUP720-3B power requirement
- WS-SUP720-3B daughter cards
WS-SUP32-GE-3B
- WS-SUP32-GE-3B memory locations
- WS-Sup32-GE-3B Memory options
- WS-SUP32-GE-3B power requirement
- WS-SUP32-GE-3B daughter cards
- not supported hardware of the WS-SUP32-GE-3B
Catalyst 6500 / Cisco7600 series Ethernet Module Daughter Cards
- catalyst 6500 / cisco7600 series Ethernet Module Daughter Cards
- memory upgrade options and requirements for Catalyst 6500 / cisco7600 series Ethernet Module Daughter Cards
System Software Conversion from CatOS to Cisco IOS for Catalyst 6500/6000 Switches
- Conversion on Supervisor Engine with MSFC1
- Conversion on Supervisor Engine with MSFC2
- Conversion on Supervisor Engine 32
- Conversion on Supervisor Engine 720
Cisco NM-cards / network modules
- Network Module Slots Available on Cisco Access Routers
- Interface Cards Supported on 1- or 2-Slot Network Modules
- Cabling for Cisco Network Modules
- Platform Support for Cisco Network Modules
Cisco GSR
Cisco GSR Linecards
- GSR linecard memory locations
- GSR linecards and their engines
- available GSR linecard memory configurations and memory partnumbers
Cisco GSR processor cards
- GSR GRP memory locations
- GSR PRP memory locations
- available GSR GRP memory configurations and memory partnumbers
- available GSR PRP memory configurations and memory partnumbers
Cisco transceivers
- connector matrix for cisco transceivers (GBICs and SFPs)
- Testing your GBIC per ping command
- GBIC/SFP/optical components
- 10-Gigabit Ethernet Transceiver Modules Compatibility Matrix
- Gigabit Ethernet Transceiver Modules Compatibility Matrix
- GLC-T - 1000 Base T and GLC-T - 10/100/1000 Base T
CWDM / DWDM
DWDM transceivers (DWDM SFP, DWDM XFP, DWDMXENPAK, DWDM X2)
- partnumber overview for cisco DWDM transceivers (DWDM SFP, DWDM XFP, DWDM XENPAK, DWDM X2)
- connector and cabling matrix for cisco DWDM transceivers (DWDM SFP, DWDM XFP, DWDM XENPAK, DWDM X2)
- channel overview for cisco DWDM transceivers (DWDM SFP, DWDM XFP, DWDM XENPAK, DWDM X2)
cables / cisco cables
Cisco IP Phones
PIX Firewalls and ASA adaptive security application platforms
PIX
- PIX-501 firewalls overview
- PIX-506 and PIX-506E firewalls overview and replacement partnumbers
- PIX-515 and PIX-515E firewalls overview and replacement partnumbers
- PIX-520 and firewalls overview and replacement partnumbers
- PIX-525 firewalls overview and replacement partnumbers
- PIX-535 firewalls overview and replacement partnumbers
- PIX Firewalls Interfaces and Cards
- PIX Firewalls Interface Cards and replacements
- PIX Firewall Specifications
- Cisco PIX 515E Firewall Partnummers and configurations
- PIX515E / ASA5510 Product configuration
- End-of-sale for Cisco PIX 515 Firewall Platform
ASA
- PIX515E / ASA5510 Product configuration
- Configuring SSH Access on a Cisco ASA 5510 Firewall
- Configuring and Cabling of Stateful Active/Standby Failover on a Cisco ASA 5510 Firewall
Test and ASA Adaptive security
Miscellaneous
Nesevo Lab
CCNA / CCNP
Cisco BPX 8600
Applying Licenses
Getting and Applying License Files to Nexus 7000 / Nexus 5000 Switches
