Cisco Catalyst 6504-E
The Cisco 6504-E switch has four horizontal slots being numbered from 1 (top) to 4 (bottom) and measures 5 rack units (5RU).
While slot 1 is reserved for the supervisor engine, slot 2 can contain an optional redundant supervisor engine.
!!! Note: When installing a redundant supervisor engine, both supervisor engines must be identical.
!!! Note: The GBIC uplink ports are fully functional on the redundant supervisor engine in stand by.
If a redundant supervisor engine is not required, slot two can be equipped with any supported cisco7600 series / catalyst 6500 series module.
Supported supervisor engines in the WS-C6504-E switch
Note: Redundant supervisor engines must be configured identically.
Supported Fan trays in the 6504-E series
Note: The FAN-MOD-4HS ist a high-speed fan tray.
Power supplies and power entry modules
The WS-C6504-E switch has two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.
Supported spower supplies in the Cisco 6504-E switch