Difference between revisions of "Getting and Applying License Files to ASR 1001 Routers"
From NesevoWiki
Jump to navigationJump to search (Created page with "* Obtain the license files in the same way as with Nexus Switches (One exception: On the ASR, you ge...") |
|||
Line 1: | Line 1: | ||
+ | The same procedure applies to many more Cisco router series, e.g. the 1900 series routers. | ||
+ | |||
* Obtain the license files in the [[Getting and Applying License Files to Nexus 7000 / Nexus 5000 Switches|same way as with Nexus Switches]] (One exception: On the ASR, you get the Serial and UDI No with the command <code>show license udi</code>, the command <code>show license host-id</code> does not exist here.) | * Obtain the license files in the [[Getting and Applying License Files to Nexus 7000 / Nexus 5000 Switches|same way as with Nexus Switches]] (One exception: On the ASR, you get the Serial and UDI No with the command <code>show license udi</code>, the command <code>show license host-id</code> does not exist here.) | ||
* Copy the <code>.lic</code> file to a USB thumb drive and insert the drive into the ASR's USB port. | * Copy the <code>.lic</code> file to a USB thumb drive and insert the drive into the ASR's USB port. |
Revision as of 10:09, 19 September 2017
The same procedure applies to many more Cisco router series, e.g. the 1900 series routers.
- Obtain the license files in the same way as with Nexus Switches (One exception: On the ASR, you get the Serial and UDI No with the command
show license udi
, the commandshow license host-id
does not exist here.) - Copy the
.lic
file to a USB thumb drive and insert the drive into the ASR's USB port. - On the ASR, switch to
enable
and copy the.lic
file to the bootflash drive:copy usb1: bootflash:
- Apply the license using the following command:
license install bootflash:<filename>.lic
- Check if the license has been applied correctly using the
sho license
command