Upgrading Firmware on Opengear CM4200 Series Console Servers
From NesevoWiki
Jump to navigationJump to searchThe printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
- Connect to the device's serial console port like explained here: Cabling_and_Configuring_Opengear_CM4148#Cabling_2
- Connect the device's network port NETWORK 1 to your network. There must be a DHCP server running.
- On the serial console, log in with user name
root
and passworddefault
- Type the command
ifconfig
and check the IP address that was assigned to interfaceeth0
(that's NETWORK 1) through DHCP. - Open that IP address in a browser over https.
- On the web interface, login with the same credentials as above
- Click System→Firmware
- Select the firmware image file and click Apply
- Wait for the upgrade process to finish
- If after 10 minutes the Power and Online LEDs are off and the device won't reboot by itself, disconnect it from power for two minutes and turn it back on again.
- Check the new firmware version has been applied through the web interface.