Password Recovery for Nexus Switches
From NesevoWiki
Jump to navigationJump to searchThe printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
- On a Windows PC, change the keyboard layout to
en-US
- Connect to the Nexus switch directly via serial console (not over ssh/telnet/Opengear etc.) using TeraTerm or PuTTY
- Power on the device
- Wait until kickstart image has booted and the POST messages have appeared.
- Right after the massage
Checking all filesystems....r. done.
has appeared, issue the break sequence to get to theswitch(boot)#
prompt.- The break sequence is
Ctrl + ]
, i.e. hold the Control-Key and hit the closing square bracket. - On a german keyboard (with US keymap activated) the Control-Key is
Strg
and the closing square bracket ist on the+ * ~
- Key.
- The break sequence is
- Enter the
conf t
command - Type
admin-password Ad123min
- Type
exit
- Type
dir bootflash:
to view bootflash content - Boot the system image, for example
load bootflash:n5000-uk9.5.1.3.N2.1b.bin
- Enter the switch with username
admin
and PasswordAd123min
- Save configuration:
copy running-config startup-config