Difference between revisions of "Password Recovery Procedure for Supervisor engine 2 / WS-X6k-S2-MSFC2"
(New page: '''Step 1:''' Type '''enable''' at Router> <br/><br/> '''Step 2:''' Enter a '''null- password''' <br/><br/> '''Step 3:''' Type '''show module''' to define the MFSC- Card. The ''MFSC-...) |
|||
(2 intermediate revisions by the same user not shown) | |||
Line 5: | Line 5: | ||
'''Step 3:''' Type '''show module''' to define the MFSC- Card. | '''Step 3:''' Type '''show module''' to define the MFSC- Card. | ||
The ''MFSC-module'' will be in slot 15 or 16. | The ''MFSC-module'' will be in slot 15 or 16. | ||
− | '''Step 4:''' Type '''reset | + | '''Step 4:''' Type '''reset 15 or 16''' in to reset the MSFC- module. |
<br/><br/> | <br/><br/> | ||
− | '''Step 5:''' Type ''' | + | '''Step 5:''' Type '''switch console''' in to get on Router> |
<br/><br/> | <br/><br/> | ||
− | '''Step 6:''' Type ''' | + | '''Step 6:''' Type '''enable''' after the reboot in. |
<br/><br/> | <br/><br/> | ||
− | '''Step 7:''' Type ''' | + | '''Step 7:''' Type '''configure memory or copy startup-config running-config'''. |
<br/><br/> | <br/><br/> | ||
− | '''Step 8:''' Type ''' | + | '''Step 8:''' Type '''show running-config'''. |
<br/><br/> | <br/><br/> | ||
− | '''Step 9:''' Type ''' | + | '''Step 9:''' Type '''configure terminal''' to change or remove the password from the router. |
<br/><br/> | <br/><br/> | ||
− | '''Step 10''' | + | '''Step 10:''' Type '''enable secret <password>''' in order to change the enable secret password or type '''NO ENABLE SECRET''' to remove the secret from router(config)#> |
<br/><br/> | <br/><br/> | ||
− | '''Step | + | '''Step 11:''' Type '''config-register <configuration_register_setting>.''' For example: hostname(config)#config-register 0x2102 . |
<br/><br/> | <br/><br/> | ||
− | '''Step 12:''' | + | '''Step 12:''' Hit '''Ctrl / z''' or '''end''' to leave the configuration mode. |
<br/><br/> | <br/><br/> | ||
− | '''Step 13 | + | '''Step 13:''' Type ''' write memory''' or '''copy running-config startup-config ''' to save the changes. |
− | |||
− | |||
<br/><br/> | <br/><br/> | ||
+ | '''Step 14:''' Type '''reload''' |
Latest revision as of 11:44, 18 September 2008
Step 1: Type enable at Router>
Step 2: Enter a null- password
Step 3: Type show module to define the MFSC- Card.
The MFSC-module will be in slot 15 or 16.
Step 4: Type reset 15 or 16 in to reset the MSFC- module.
Step 5: Type switch console in to get on Router>
Step 6: Type enable after the reboot in.
Step 7: Type configure memory or copy startup-config running-config.
Step 8: Type show running-config.
Step 9: Type configure terminal to change or remove the password from the router.
Step 10: Type enable secret <password> in order to change the enable secret password or type NO ENABLE SECRET to remove the secret from router(config)#>
Step 11: Type config-register <configuration_register_setting>. For example: hostname(config)#config-register 0x2102 .
Step 12: Hit Ctrl / z or end to leave the configuration mode.
Step 13: Type write memory or copy running-config startup-config to save the changes.
Step 14: Type reload