Password Recovery Procedure for Supervisor engine 2 / WS-X6k-S2-MSFC2
Step 1: Type enable at Router>
Step 2: Enter a null- password
Step 3: Type show module to define the MFSC- Card.
The MFSC-module will be in slot 15 or 16.
Step 4: Type reset 15 or 16 in to reset the MSFC- module.
Step 5: Type switch console in to get on Router>
Step 6: Type enable after the reboot in.
Step 7: Type configure memory or copy startup-config running-config.
Step 8: Type show running-config.
Step 9: Type configure terminal to change or remove the password from the router.
Step 10: Type enable secret <password> in order to change the enable secret password or type NO ENABLE SECRET to remove the secret from router(config)#>
Step 11: Type config-register <configuration_register_setting>. For example: hostname(config)#config-register 0x2102 .
Step 12: Hit Ctrl / z or end to leave the configuration mode.
Step 13: Type write memory or copy running-config startup-config to save the changes.
Step 14: Type reload