Difference between revisions of "Password Recovery Procedure for Supervisor engine 2 / WS-X6k-S2-MSFC2"

From NesevoWiki
Jump to navigationJump to search
Line 7: Line 7:
 
'''Step 4:''' Type '''reset 15 or 16''' in to reset the MSFC- module.
 
'''Step 4:''' Type '''reset 15 or 16''' in to reset the MSFC- module.
 
<br/><br/>
 
<br/><br/>
−
'''Step 5:''' Type '''enable'' after the reboot in.
+
'''Step 5:''' Type '''switch console''' in to get on Router>
 
<br/><br/>
 
<br/><br/>
−
'''Step 6:''' Type '''configure memory or copy startup-config running-config'''.
+
'''Step 6:''' Type '''enable'' after the reboot in.
 
<br/><br/>
 
<br/><br/>
−
'''Step 7:''' Type '''show running-config'''.
+
'''Step 7:''' Type '''configure memory or copy startup-config running-config'''.
 
<br/><br/>
 
<br/><br/>
−
'''Step 8:''' Type '''configure terminal''' to change or remove the password from the router.
+
'''Step 8:''' Type '''show running-config'''.
 
<br/><br/>
 
<br/><br/>
−
'''Step 9:''' Type '''enable secret <password>''' in order to change the enable secret password or type '''NO ENABLE SECRET''' to remove the secret from router(config)#>
+
'''Step 9:''' Type '''configure terminal''' to change or remove the password from the router.
 
<br/><br/>
 
<br/><br/>
−
'''Step 10''': type: '''''NO ENABLE PASSWORD''''' to remove the password from router (config)#>
+
'''Step 10:''' Type '''enable secret <password>''' in order to change the enable secret password or type '''NO ENABLE SECRET''' to remove the secret from router(config)#>  
 
<br/><br/>
 
<br/><br/>
−
'''Step 14:''' Type the '''no shutdown''' command on every interface that you use.
+
'''Step 11:''' Type '''config-register <configuration_register_setting>.''' For example: hostname(config)#config-register 0x2102 .
 
<br/><br/>
 
<br/><br/>
−
'''Step 12:''' Type '''config-register <configuration_register_setting>.''' For example: hostname(config)#config-register 0x2102 .
+
'''Step 12:''' Hit '''Ctrl / z''' or '''end''' to leave the configuration mode.
 
<br/><br/>
 
<br/><br/>
−
'''Step 13:''' Hit '''Ctrl / z''' or '''end''' to leave the configuration mode.
+
'''Step 13:''' Type ''' write memory''' or '''copy running-config startup-config ''' to save the changes.
−
<br/><br/>
 
−
'''Step 14:''' Type ''' write memory''' or '''copy running-config startup-config ''' to save the changes.
 
 
<br/><br/>
 
<br/><br/>
 +
'''Step 14:''' Type '''reload'''

Revision as of 11:43, 18 September 2008

Step 1: Type enable at Router>

Step 2: Enter a null- password

Step 3: Type show module to define the MFSC- Card. 

    The MFSC-module will be in slot 15 or 16.

Step 4: Type reset 15 or 16 in to reset the MSFC- module.

Step 5: Type switch console in to get on Router>

'Step 6: Type enable after the reboot in.

Step 7: Type configure memory or copy startup-config running-config.

Step 8: Type show running-config.

Step 9: Type configure terminal to change or remove the password from the router.

Step 10: Type enable secret <password> in order to change the enable secret password or type NO ENABLE SECRET to remove the secret from router(config)#>

Step 11: Type config-register <configuration_register_setting>. For example: hostname(config)#config-register 0x2102 .

Step 12: Hit Ctrl / z or end to leave the configuration mode.

Step 13: Type write memory or copy running-config startup-config to save the changes.

Step 14: Type reload

Retrieved from "http://wiki.nesevo.com/index.php?title=Password_Recovery_Procedure_for_Supervisor_engine_2_/_WS-X6k-S2-MSFC2&oldid=572"