Difference between revisions of "Password Recovery Procedure for Supervisor engine 2 / WS-X6k-S2-MSFC2"
(New page: '''Step 1:''' Type '''enable''' at Router> <br/><br/> '''Step 2:''' Enter a '''null- password''' <br/><br/> '''Step 3:''' Type '''show module''' to define the MFSC- Card. The ''MFSC-...) |
|||
| Line 5: | Line 5: | ||
'''Step 3:''' Type '''show module''' to define the MFSC- Card. | '''Step 3:''' Type '''show module''' to define the MFSC- Card. | ||
The ''MFSC-module'' will be in slot 15 or 16. | The ''MFSC-module'' will be in slot 15 or 16. | ||
| − | '''Step 4:''' Type '''reset | + | '''Step 4:''' Type '''reset 15 or 16''' in to reset the MSFC- module. |
<br/><br/> | <br/><br/> | ||
'''Step 5:''' Type '''enable'' after the reboot in. | '''Step 5:''' Type '''enable'' after the reboot in. | ||
Revision as of 11:26, 18 September 2008
Step 1: Type enable at Router>
Step 2: Enter a null- password
Step 3: Type show module to define the MFSC- Card.
The MFSC-module will be in slot 15 or 16.
Step 4: Type reset 15 or 16 in to reset the MSFC- module.
'Step 5: Type enable after the reboot in.
Step 6: Type configure memory or copy startup-config running-config.
Step 7: Type show running-config.
Step 8: Type configure terminal to change or remove the password from the router.
Step 9: Type enable secret <password> in order to change the enable secret password or type NO ENABLE SECRET to remove the secret from router(config)#>
Step 10: type: NO ENABLE PASSWORD to remove the password from router (config)#>
Step 14: Type the no shutdown command on every interface that you use.
Step 12: Type config-register <configuration_register_setting>. For example: hostname(config)#config-register 0x2102 .
Step 13: Hit Ctrl / z or end to leave the configuration mode.
Step 14: Type write memory or copy running-config startup-config to save the changes.
