Install ASR9k IOS from ROMMON via TFTP
From NesevoWiki
Jump to navigationJump to searchThe printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
- Connect to the Console Port
- Get to ROMMON prompt (sometimes you have to hit CTRL-C whan asked)
- Connect Mgmt0 port to the network
- Place the vm File of your ASR IOSXR distribution (e.g.
asr9k-mini-px.vm-4.3.0
, normally found within the tar file of your distribution) onto your TFTP server - Issue the following commands from the ROMMON promt, line by line (bold values may have to be replaced acording to your environment):
unset BOOT unset TFTP_FILE sync unset BOOT_DEV_SEQ_OPER unset MIRROR_ENABLE sync priv diswd IP_ADDRESS=192.168.1.241 IP_SUBNET_MASK=255.255.255.0 DEFAULT_GATEWAY=192.168.1.254 TFTP_RETRY_COUNT=4 TFTP_TIMEOUT=6000 TFTP_CHECKSUM=1 TFTP_SERVER=192.168.1.11 TFTP_MGMT_INTF=0 TFTP_BLKSIZE=1400 TURBOBOOT=on,disk0,format sync
- Now, boot and install via TFTP
boot tftp://192.168.1.11/asr9k-mini-px.vm-4.3.0
- Wait without hitting any key until the ASR reboots. May take quite long, 30 mins or so.
- Type
show install active
and check the path starts withdisk0:
and notmem:
. If it starts withmem:
, you have to repeat the whole procedure.