Firmware Update FortiAnalyzer 200D

• Connect to the Console Port, just like to a Cisco device
• Connect the MGMT port to your network
• Put the system image file you wich to install in your TFTP server's root directory
• Turn on the device
• Caution: If you have a typo anywhere in this process, you have to start at zero.
• When you see the message Press any key to display configuration menu..., hit the [SPACE] bar
• Type [G] to get firmware image from TFTP server.
• Provide local IP address, TFTP server's IP address and system image file name when prompted
• When asked Save as Default firmware/Backup firmware/Run image without saving:[D/B/R]?, type [D]
• Wait for the device to restart and boot the new image