Difference between revisions of "Cisco Catalyst 6504-E"

From NesevoWiki
Jump to navigationJump to search
(New page: ==Video Datasheet== [http://www.youtube.com/watch?v=ObuUkGR9RBc Cisco Catalyst 6504-E Datasheet] ==Supervisor engines== The Cisco 6504-E switch has four horizontal slots being numbered fro...)
 
Line 2: Line 2:
 
[http://www.youtube.com/watch?v=ObuUkGR9RBc Cisco Catalyst 6504-E Datasheet]
 
[http://www.youtube.com/watch?v=ObuUkGR9RBc Cisco Catalyst 6504-E Datasheet]
 
==Supervisor engines==
 
==Supervisor engines==
The Cisco 6504-E switch has four horizontal slots being numbered from 1 (top) to 4 (bottom)
+
The Cisco 6504-E switch has four horizontal slots being numbered from 1 (top) to 4 (bottom) and measures 5 rack units (5RU).<br/>
<br/><br/>
+
While slot 1 is reserved for the supervisor engine, slot 2 can contain an optional redundant supervisor engine.<br/>
 +
''!!! Note: When installing a redundant supervisor engine, both supervisor engines must be identical.''<br/>
 +
''!!! Note: The GBIC uplink ports are fully functional on the redundant supervisor engine in stand by.''<br/>
 +
If a redundant supervisor engine is not required, slot two can be equipped with any supported cisco7600 series / catalyst 6500 series module.
 +
<br/>
 
'''Supported supervisor engines in the WS-C6504-E switch'''
 
'''Supported supervisor engines in the WS-C6504-E switch'''
 
*Supervisor Engine 32  
 
*Supervisor Engine 32  

Revision as of 09:24, 12 October 2009

Video Datasheet

Cisco Catalyst 6504-E Datasheet

Supervisor engines

The Cisco 6504-E switch has four horizontal slots being numbered from 1 (top) to 4 (bottom) and measures 5 rack units (5RU).
While slot 1 is reserved for the supervisor engine, slot 2 can contain an optional redundant supervisor engine.
!!! Note: When installing a redundant supervisor engine, both supervisor engines must be identical.
!!! Note: The GBIC uplink ports are fully functional on the redundant supervisor engine in stand by.
If a redundant supervisor engine is not required, slot two can be equipped with any supported cisco7600 series / catalyst 6500 series module.
Supported supervisor engines in the WS-C6504-E switch


Note: Redundant supervisor engines must be configured identically.

Fan trays

Supported Fan trays in the 6504-E series
FAN-MOD-4HS

Note: The WS-C6504-E-Fan ist a high-speed fan tray.

Power supplies and power entry modules

The WS-C6504-E switch has two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.

Supported spower supplies in the Cisco 6504-E switch


  • PWR-2700-DC/4