Difference between revisions of "Cisco7604 router"
(New page: ==Supervisor engines== The Cisco7604 router has four horizontal slots being numbered from top to bottom and measures 5 rack units (5 RU).<br/> While slot 1 is reserved for the supervisor e...) |
|||
| Line 5: | Line 5: | ||
''!!! Note: The GBIC uplink ports are fully functional on the redundant supervisor engine in stand by.''<br/> | ''!!! Note: The GBIC uplink ports are fully functional on the redundant supervisor engine in stand by.''<br/> | ||
If a redundant supervisor engine is not required, slot two can be equipped with any supported cisco7600 series / catalyst 6500 series module.<br/> | If a redundant supervisor engine is not required, slot two can be equipped with any supported cisco7600 series / catalyst 6500 series module.<br/> | ||
| − | |||
| − | + | '''Supported supervisor engines in the Cisco7604 router'''<br/> | |
| − | |||
| − | |||
| − | |||
*Supervisor engine 720<br/> | *Supervisor engine 720<br/> | ||
| Line 17: | Line 13: | ||
**WS-SUP720-3BXL<br/> | **WS-SUP720-3BXL<br/> | ||
| − | + | *Route switch processor 720<br/> | |
| − | + | **RSP720-3C-GE<br/> | |
| − | + | **RSP720-3CXL-GE<br/> | |
*Supervisor engine 32<br/> | *Supervisor engine 32<br/> | ||
| Line 25: | Line 21: | ||
**WS-SUP32-10GE-3B<br/> | **WS-SUP32-10GE-3B<br/> | ||
| − | + | ''!!! Note: While being supported in the Cisco7603 router, the supervisor engine 2 is not supported in the ciso7604 router'' | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | ''!!! Note: the supervisor engine 2 is not | ||
==Power supplies and power entry modules== | ==Power supplies and power entry modules== | ||
Revision as of 15:31, 9 May 2008
Supervisor engines
The Cisco7604 router has four horizontal slots being numbered from top to bottom and measures 5 rack units (5 RU).
While slot 1 is reserved for the supervisor engine, slot 2 can contain an optional redundant supervisor engine.
!!! Note: When installing a redundant supervisor engine, both supervisor engines must be identical.
!!! Note: The GBIC uplink ports are fully functional on the redundant supervisor engine in stand by.
If a redundant supervisor engine is not required, slot two can be equipped with any supported cisco7600 series / catalyst 6500 series module.
Supported supervisor engines in the Cisco7604 router
- Supervisor engine 720
- WS-SUP720
- WS-SUP720-3B
- WS-SUP720-3BXL
- WS-SUP720
- Route switch processor 720
- RSP720-3C-GE
- RSP720-3CXL-GE
- RSP720-3C-GE
- Supervisor engine 32
- WS-SUP32-GE-3B
- WS-SUP32-10GE-3B
- WS-SUP32-GE-3B
!!! Note: While being supported in the Cisco7603 router, the supervisor engine 2 is not supported in the ciso7604 router
Power supplies and power entry modules
Both, the Cisco7603 and the Cisco7603-S router have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.
Supported spower supplies in the Cisco7603 router
- 950 watt AC-input power supply
- PWR-950-AC
- PWR-950-AC
!!! Note: the power entry module PEM-15A-AC is needed when using a PWR-950-AC. You need one PEM-15A-AC per PWR-950-AC.
The power entry modules are installed on the front of the chassis on the very top.
- 950 watt DC-input power supply
- PWR-950-DC
- PWR-950-DC
!!! Note: the power entry module PEM-DC/3 is needed when using a PWR-950-DC. You need one PEM-DC/3 per PWR-950-DC.
The power entry modules are installed on the front of the chassis on the very top.
- 1400 watt AC-input power supply
- PWR-1400-AC
- PWR-1400-AC
!!! Note: the power entry module PEM-20A-AC+ is needed when using a PWR-1400-AC. You need one PEM-20A-AC+ per PWR-1400-AC.
The power entry modules are installed on the front of the chassis on the very top.
Supported spower supplies in the Cisco7603-S router
- 1500 watt DC-input power supply
- PWR-1500-DC
- PWR-1500-DC
!!! Note: the power entry module PEM-1500W-DC/03S is needed when using a PWR-1500-DC. You need one PEM-1500W-DC/03S per PWR-1500-DC.
The power entry modules are installed on the front of the chassis on the very top.
There is no longer an AC power supply option for the Cisco7603-S router
Fan trays
Supported fan trays in the Cisco7603 router
- standard fan module
- FAN-MOD-3
- FAN-MOD-3
- high speed fan module
- FAN-MOD-3HS
- FAN-MOD-3HS
!!! Note: supervisor engine 720 configurations require the FAN-MOD-3HS. The FAN-MOD-3 will only work in supervisor engine 2 configurations.
Supported fan trays in the Cisco7603-S router
- high speed fan module
- FAN-MOD-3SHS
- FAN-MOD-3SHS
!!! Note: As a result of the sup 32 being the minimum required supervisor engine for the Cisco7603-S, no standard fan tray is supported in any cisco7603-S configuration. Both high speed fans, the FAN-MOD-3SHS and the FAN-MOD-3HS will work in the Cisco7603-S. With the FAN-MOD-3SHS being white, the colour would be the only difference.
