Difference between revisions of "Available GSR PRP memory configurations and memory partnumbers"
From NesevoWiki
Jump to navigationJump to search| Line 7: | Line 7: | ||
'''''Note: 1.5 GB MB memory size is not supported. '''''<br/> | '''''Note: 1.5 GB MB memory size is not supported. '''''<br/> | ||
<br/> | <br/> | ||
| + | {| border = "1" | ||
| + | ||'''Route Memory Configurations Available for Cisco 12000 Series Router PRP''' | ||
| + | || | ||
| + | || | ||
| + | || | ||
| + | |- | ||
| + | ||Total Route Memory | ||
| + | ||Cisco Product Number | ||
| + | ||DIMM Modules | ||
| + | ||SDRAM DIMM Sockets | ||
| + | |- | ||
| + | ||512 MB | ||
| + | ||Default SDRAM config. | ||
| + | ||1 x 512-MB DIMM | ||
| + | ||U15 | ||
| + | |- | ||
| + | ||1 GB | ||
| + | ||MEM-PRP-512= | ||
| + | ||2 x 512-MB DIMMs | ||
| + | ||U15 und U18 | ||
| + | |- | ||
| + | ||1 GB | ||
| + | ||MEM-PRP-1G= | ||
| + | ||1 x 1-GB DIMM | ||
| + | ||U15 | ||
| + | |- | ||
| + | ||1.5 GB | ||
| + | ||not supported | ||
| + | ||— | ||
| + | ||— | ||
| + | |- | ||
| + | ||2 GB | ||
| + | ||2MEM-PRP-1G= | ||
| + | ||2 x 1-GB DIMMs | ||
| + | ||U15 und U18 | ||
| + | |- | ||
| + | |} | ||
Latest revision as of 14:30, 16 March 2009
Note: Do not mix memory sizes. If installing 2 DIMMs, both DIMMs must be the same size.
Note: Default SDRAM configuration is 512 MB. Bank 1 (U15) must be populated first. You can use one or both banks to configure SDRAM combinations of 512 MB, 1 GB, or 2 GB.
Note: One 512-MB DIMM is the default shipping configuration.
Note: 1.5 GB MB memory size is not supported.
| Route Memory Configurations Available for Cisco 12000 Series Router PRP | |||
| Total Route Memory | Cisco Product Number | DIMM Modules | SDRAM DIMM Sockets |
| 512 MB | Default SDRAM config. | 1 x 512-MB DIMM | U15 |
| 1 GB | MEM-PRP-512= | 2 x 512-MB DIMMs | U15 und U18 |
| 1 GB | MEM-PRP-1G= | 1 x 1-GB DIMM | U15 |
| 1.5 GB | not supported | — | — |
| 2 GB | 2MEM-PRP-1G= | 2 x 1-GB DIMMs | U15 und U18 |
