Applying a configuration file to a Fortinet Fortigate Firewall

From NesevoWiki
Revision as of 13:30, 5 January 2015 by Philipp (talk | contribs)
Jump to navigationJump to search
  • General assumption: The device is configured according to factory defaults.
  • Connect to the serial console of the device (just like to a Cisco device, same serial port settings)
  • Log in using username admin and no password (just hit ENTER).
  • Connect your computer's network port to the MGMT network port of the device. Configure your computer's NIC to use a static IP address (192.168.1.100/255.255.255.0).
  • Access the devices web interface on https://192.168.1.99 and log in with the same credentials as above.
Retrieved from "http://wiki.nesevo.com/index.php?title=Applying_a_configuration_file_to_a_Fortinet_Fortigate_Firewall&oldid=2632"