Difference between revisions of "Applying a configuration file to a 25XX WLAN controller"

From NesevoWiki
Jump to navigationJump to search
 
Line 3: Line 3:
 
* Connect device to network (port 1)
 
* Connect device to network (port 1)
 
* Finish basic config wizard on console as described [[Loading IOS on a 25XX WLAN Controller|here]]
 
* Finish basic config wizard on console as described [[Loading IOS on a 25XX WLAN Controller|here]]
 +
* Put the config file you want to apply into your TFTP server's root directory
  
 
=== Apply config via browser interface ===
 
=== Apply config via browser interface ===

Latest revision as of 11:32, 18 March 2015

  • General Assunption: Device is unconfigured
  • Connect device to serial console
  • Connect device to network (port 1)
  • Finish basic config wizard on console as described here
  • Put the config file you want to apply into your TFTP server's root directory

Apply config via browser interface

  • Connect to device's static IP address via https
  • Log in using credentials used in config wizard
  • Click Advanced in top left corner
  • Click Commands, then Download File
    • File Type: Configuration
    • Configuration File Encryption: No
    • Transfer Mode: TFTP
    • IP Address: 192.168.1.11
    • Maximum retries: 10
    • Timeout (seconds): 6
    • File Path: /
    • File Name: whatever.cfg
  • Click Download
  • Config file will be loaded onto the device, applied and system reset

Apply config via command line interface

  • Connect to the serial console and log in
  • transfer download datatype config
  • transfer download mode tftp
  • transfer download serverip 192.168.1.11
  • transfer download path .
  • transfer download filename configfile.conf
  • transfer download start
Retrieved from "http://wiki.nesevo.com/index.php?title=Applying_a_configuration_file_to_a_25XX_WLAN_controller&oldid=2668"