Difference between revisions of "Applying a configuration file to a 25XX WLAN controller"
From NesevoWiki
Jump to navigationJump to search(2 intermediate revisions by the same user not shown) | |||
Line 3: | Line 3: | ||
* Connect device to network (port 1) | * Connect device to network (port 1) | ||
* Finish basic config wizard on console as described [[Loading IOS on a 25XX WLAN Controller|here]] | * Finish basic config wizard on console as described [[Loading IOS on a 25XX WLAN Controller|here]] | ||
+ | * Put the config file you want to apply into your TFTP server's root directory | ||
=== Apply config via browser interface === | === Apply config via browser interface === | ||
Line 21: | Line 22: | ||
=== Apply config via command line interface === | === Apply config via command line interface === | ||
+ | * Connect to the serial console and log in | ||
* <code>transfer download datatype config</code> | * <code>transfer download datatype config</code> | ||
* <code>transfer download mode tftp</code> | * <code>transfer download mode tftp</code> | ||
* <code>transfer download serverip 192.168.1.11</code> | * <code>transfer download serverip 192.168.1.11</code> | ||
* <code>transfer download path .</code> | * <code>transfer download path .</code> | ||
− | * <code>transfer download filename | + | * <code>transfer download filename configfile.conf</code> |
* <code>transfer download start</code> | * <code>transfer download start</code> |
Latest revision as of 11:32, 18 March 2015
- General Assunption: Device is unconfigured
- Connect device to serial console
- Connect device to network (port 1)
- Finish basic config wizard on console as described here
- Put the config file you want to apply into your TFTP server's root directory
Apply config via browser interface
- Connect to device's static IP address via https
- Log in using credentials used in config wizard
- Click Advanced in top left corner
- Click Commands, then Download File
- File Type:
Configuration
- Configuration File Encryption:
No
- Transfer Mode:
TFTP
- IP Address:
192.168.1.11
- Maximum retries:
10
- Timeout (seconds):
6
- File Path:
/
- File Name:
whatever.cfg
- File Type:
- Click Download
- Config file will be loaded onto the device, applied and system reset
Apply config via command line interface
- Connect to the serial console and log in
transfer download datatype config
transfer download mode tftp
transfer download serverip 192.168.1.11
transfer download path .
transfer download filename configfile.conf
transfer download start