Difference between revisions of "Applying a configuration file to a 25XX WLAN controller"
From NesevoWiki
Jump to navigationJump to search| (6 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
* Connect device to network (port 1) | * Connect device to network (port 1) | ||
* Finish basic config wizard on console as described [[Loading IOS on a 25XX WLAN Controller|here]] | * Finish basic config wizard on console as described [[Loading IOS on a 25XX WLAN Controller|here]] | ||
| + | * Put the config file you want to apply into your TFTP server's root directory | ||
| + | |||
| + | === Apply config via browser interface === | ||
* Connect to device's static IP address via https | * Connect to device's static IP address via https | ||
* Log in using credentials used in config wizard | * Log in using credentials used in config wizard | ||
| Line 16: | Line 19: | ||
** ''File Name:'' <code>whatever.cfg</code> | ** ''File Name:'' <code>whatever.cfg</code> | ||
* Click ''Download'' | * Click ''Download'' | ||
| + | * Config file will be loaded onto the device, applied and system reset | ||
| + | |||
| + | === Apply config via command line interface === | ||
| + | * Connect to the serial console and log in | ||
| + | * <code>transfer download datatype config</code> | ||
| + | * <code>transfer download mode tftp</code> | ||
| + | * <code>transfer download serverip 192.168.1.11</code> | ||
| + | * <code>transfer download path .</code> | ||
| + | * <code>transfer download filename configfile.conf</code> | ||
| + | * <code>transfer download start</code> | ||
Latest revision as of 11:32, 18 March 2015
- General Assunption: Device is unconfigured
- Connect device to serial console
- Connect device to network (port 1)
- Finish basic config wizard on console as described here
- Put the config file you want to apply into your TFTP server's root directory
Apply config via browser interface
- Connect to device's static IP address via https
- Log in using credentials used in config wizard
- Click Advanced in top left corner
- Click Commands, then Download File
- File Type:
Configuration - Configuration File Encryption:
No - Transfer Mode:
TFTP - IP Address:
192.168.1.11 - Maximum retries:
10 - Timeout (seconds):
6 - File Path:
/ - File Name:
whatever.cfg
- File Type:
- Click Download
- Config file will be loaded onto the device, applied and system reset
Apply config via command line interface
- Connect to the serial console and log in
transfer download datatype configtransfer download mode tftptransfer download serverip 192.168.1.11transfer download path .transfer download filename configfile.conftransfer download start
