Difference between revisions of "Applying a configuration file to a 25XX WLAN controller"
From NesevoWiki
Jump to navigationJump to search| Line 4: | Line 4: | ||
* Finish basic config wizard on console as described [[Loading IOS on a 25XX WLAN Controller|here]] | * Finish basic config wizard on console as described [[Loading IOS on a 25XX WLAN Controller|here]] | ||
| − | + | === Apply config via browser interface === | |
* Connect to device's static IP address via https | * Connect to device's static IP address via https | ||
* Log in using credentials used in config wizard | * Log in using credentials used in config wizard | ||
| Line 20: | Line 20: | ||
* Config file will be loaded onto the device, applied and system reset | * Config file will be loaded onto the device, applied and system reset | ||
| − | + | === Apply config via command line interface === | |
* <code>transfer download datatype config</code> | * <code>transfer download datatype config</code> | ||
* <code>transfer download mode tftp</code> | * <code>transfer download mode tftp</code> | ||
Revision as of 11:23, 18 March 2015
- General Assunption: Device is unconfigured
- Connect device to serial console
- Connect device to network (port 1)
- Finish basic config wizard on console as described here
Apply config via browser interface
- Connect to device's static IP address via https
- Log in using credentials used in config wizard
- Click Advanced in top left corner
- Click Commands, then Download File
- File Type:
Configuration - Configuration File Encryption:
No - Transfer Mode:
TFTP - IP Address:
192.168.1.11 - Maximum retries:
10 - Timeout (seconds):
6 - File Path:
/ - File Name:
whatever.cfg
- File Type:
- Click Download
- Config file will be loaded onto the device, applied and system reset
Apply config via command line interface
transfer download datatype configtransfer download mode tftptransfer download serverip 192.168.1.11transfer download path .transfer download filename AIR-CT2500-K9-7-6-110-0.aestransfer download start
