Difference between revisions of "Applying a configuration file to a 25XX WLAN controller"
From NesevoWiki
Jump to navigationJump to searchLine 3: | Line 3: | ||
* Connect device to network (port 1) | * Connect device to network (port 1) | ||
* Finish basic config wizard on console as described [[Loading IOS on a 25XX WLAN Controller|here]] | * Finish basic config wizard on console as described [[Loading IOS on a 25XX WLAN Controller|here]] | ||
− | * Connect to device's static IP address via https | + | * Apply config via browser interface |
− | * Log in using credentials used in config wizard | + | ** Connect to device's static IP address via https |
− | * Click ''Advanced'' in top left corner | + | ** Log in using credentials used in config wizard |
− | * Click ''Commands'', then ''Download File'' | + | ** Click ''Advanced'' in top left corner |
− | ** ''File Type:'' <code>Configuration</code> | + | ** Click ''Commands'', then ''Download File'' |
− | ** ''Configuration File Encryption:'' <code>No</code> | + | *** ''File Type:'' <code>Configuration</code> |
− | ** ''Transfer Mode:'' <code>TFTP</code> | + | *** ''Configuration File Encryption:'' <code>No</code> |
− | ** ''IP Address:'' <code>192.168.1.11</code> | + | *** ''Transfer Mode:'' <code>TFTP</code> |
− | ** ''Maximum retries:'' <code>10</code> | + | *** ''IP Address:'' <code>192.168.1.11</code> |
− | ** ''Timeout (seconds):'' <code>6</code> | + | *** ''Maximum retries:'' <code>10</code> |
− | ** ''File Path:'' <code>/</code> | + | *** ''Timeout (seconds):'' <code>6</code> |
− | ** ''File Name:'' <code>whatever.cfg</code> | + | *** ''File Path:'' <code>/</code> |
− | * Click ''Download'' | + | *** ''File Name:'' <code>whatever.cfg</code> |
− | * Config file will be loaded onto the device, applied and system reset | + | ** Click ''Download'' |
+ | ** Config file will be loaded onto the device, applied and system reset | ||
+ | * Apply config via command line interface | ||
+ | ** transfer download datatype config | ||
+ | ** transfer download mode tftp | ||
+ | ** transfer download serverip 192.168.1.11 | ||
+ | ** transfer download path . | ||
+ | ** transfer download filename AIR-CT2500-K9-7-6-110-0.aes | ||
+ | ** transfer download start |
Revision as of 11:20, 18 March 2015
- General Assunption: Device is unconfigured
- Connect device to serial console
- Connect device to network (port 1)
- Finish basic config wizard on console as described here
- Apply config via browser interface
- Connect to device's static IP address via https
- Log in using credentials used in config wizard
- Click Advanced in top left corner
- Click Commands, then Download File
- File Type:
Configuration
- Configuration File Encryption:
No
- Transfer Mode:
TFTP
- IP Address:
192.168.1.11
- Maximum retries:
10
- Timeout (seconds):
6
- File Path:
/
- File Name:
whatever.cfg
- File Type:
- Click Download
- Config file will be loaded onto the device, applied and system reset
- Apply config via command line interface
- transfer download datatype config
- transfer download mode tftp
- transfer download serverip 192.168.1.11
- transfer download path .
- transfer download filename AIR-CT2500-K9-7-6-110-0.aes
- transfer download start