Difference between revisions of "Applying a configuration file to a 25XX WLAN controller"
From NesevoWiki
Jump to navigationJump to searchLine 16: | Line 16: | ||
** ''File Name:'' <code>whatever.cfg</code> | ** ''File Name:'' <code>whatever.cfg</code> | ||
* Click ''Download'' | * Click ''Download'' | ||
+ | * Config file will be loaded onto the device, applied and system reset |
Revision as of 17:18, 11 March 2015
- General Assunption: Device is unconfigured
- Connect device to serial console
- Connect device to network (port 1)
- Finish basic config wizard on console as described here
- Connect to device's static IP address via https
- Log in using credentials used in config wizard
- Click Advanced in top left corner
- Click Commands, then Download File
- File Type:
Configuration
- Configuration File Encryption:
No
- Transfer Mode:
TFTP
- IP Address:
192.168.1.11
- Maximum retries:
10
- Timeout (seconds):
6
- File Path:
/
- File Name:
whatever.cfg
- File Type:
- Click Download
- Config file will be loaded onto the device, applied and system reset