Difference between revisions of "Applying a configuration file to a 25XX WLAN controller"

From NesevoWiki
Jump to navigationJump to search
Line 15: Line 15:
 
** ''File Path:'' <code>/</code>
 
** ''File Path:'' <code>/</code>
 
** ''File Name:'' <code>whatever.cfg</code>
 
** ''File Name:'' <code>whatever.cfg</code>
 +
* Click ''Download''

Revision as of 17:17, 11 March 2015

  • General Assunption: Device is unconfigured
  • Connect device to serial console
  • Connect device to network (port 1)
  • Finish basic config wizard on console as described here
  • Connect to device's static IP address via https
  • Log in using credentials used in config wizard
  • Click Advanced in top left corner
  • Click Commands, then Download File
    • File Type: Configuration
    • Configuration File Encryption: No
    • Transfer Mode: TFTP
    • IP Address: 192.168.1.11
    • Maximum retries: 10
    • Timeout (seconds): 6
    • File Path: /
    • File Name: whatever.cfg
  • Click Download
Retrieved from "http://wiki.nesevo.com/index.php?title=Applying_a_configuration_file_to_a_25XX_WLAN_controller&oldid=2655"