Difference between revisions of "Applying a configuration file to a 25XX WLAN controller"
From NesevoWiki
Jump to navigationJump to search (Created page with "* General Assunption: Device is unconfigured * Connect device to serial console * Connect device to network (port 1) * Finish basic config wizard on console as described [[Loa...") |
|||
| Line 3: | Line 3: | ||
* Connect device to network (port 1) | * Connect device to network (port 1) | ||
* Finish basic config wizard on console as described [[Loading IOS on a 25XX WLAN Controller|here]] | * Finish basic config wizard on console as described [[Loading IOS on a 25XX WLAN Controller|here]] | ||
| + | * Connect to device's static IP address via https | ||
| + | * Log in using credentials used in config wizard | ||
| + | * Click ''Advanced'' in top left corner | ||
| + | * Click ''Commands'', then ''Download File'' | ||
| + | ** ''File Type:'' Configuration | ||
| + | ** ''Configuration File Encryption:'' No | ||
| + | ** ''Transfer Mode:'' TFTP | ||
| + | ** ''IP Address:'' 192.168.1.11 | ||
| + | ** ''Maximum retries:'' 10 | ||
| + | ** ''Timeout (seconds):'' 6 | ||
| + | ** ''File Path:'' / | ||
| + | ** ''File Name:'' whatever.cfg | ||
Revision as of 17:15, 11 March 2015
- General Assunption: Device is unconfigured
- Connect device to serial console
- Connect device to network (port 1)
- Finish basic config wizard on console as described here
- Connect to device's static IP address via https
- Log in using credentials used in config wizard
- Click Advanced in top left corner
- Click Commands, then Download File
- File Type: Configuration
- Configuration File Encryption: No
- Transfer Mode: TFTP
- IP Address: 192.168.1.11
- Maximum retries: 10
- Timeout (seconds): 6
- File Path: /
- File Name: whatever.cfg
