Upgrading Firmware on Opengear CM4200 Series Console Servers

From NesevoWiki
Revision as of 11:24, 8 March 2016 by Philipp (talk | contribs) (Created page with "* Connect to the device's serial console port like explained here: Cabling_and_Configuring_Opengear_CM4148#Cabling_2 * Connect the device's network port ''NETWORK 1'' to y...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
  • Connect to the device's serial console port like explained here: Cabling_and_Configuring_Opengear_CM4148#Cabling_2
  • Connect the device's network port NETWORK 1 to your network. There must be a DHCP server running.
  • On the serial console, log in with user name root and password default
  • Type the command ifconfig and check the IP address that was assigned to interface eth0 (that's NETWORK 1) through DHCP.
  • Open that IP address in a browser over https.
  • On the web interface, login with the same credentials as above
  • Click System→Firmware
Retrieved from "http://wiki.nesevo.com/index.php?title=Upgrading_Firmware_on_Opengear_CM4200_Series_Console_Servers&oldid=2698"