Applying a configuration file to a 25XX WLAN controller

• General Assunption: Device is unconfigured
• Connect device to serial console
• Connect device to network (port 1)
• Finish basic config wizard on console as described here

!!! Apply config via browser interface

• Connect to device's static IP address via https
• Log in using credentials used in config wizard
• Click Advanced in top left corner
• Click Commands, then Download File
  • File Type: Configuration
  • Configuration File Encryption: No
  • Transfer Mode: TFTP
  • IP Address: 192.168.1.11
  • Maximum retries: 10
  • Timeout (seconds): 6
  • File Path: /
  • File Name: whatever.cfg
• Click Download
• Config file will be loaded onto the device, applied and system reset

!!! Apply config via command line interface

• transfer download datatype config
• transfer download mode tftp
• transfer download serverip 192.168.1.11
• transfer download path .
• transfer download filename AIR-CT2500-K9-7-6-110-0.aes
• transfer download start