Applying a configuration file to a 25XX WLAN controller

• General Assunption: Device is unconfigured
• Connect device to serial console
• Connect device to network (port 1)
• Finish basic config wizard on console as described here
• Apply config via browser interface
  • Connect to device's static IP address via https
  • Log in using credentials used in config wizard
  • Click Advanced in top left corner
  • Click Commands, then Download File
    • File Type: Configuration
    • Configuration File Encryption: No
    • Transfer Mode: TFTP
    • IP Address: 192.168.1.11
    • Maximum retries: 10
    • Timeout (seconds): 6
    • File Path: /
    • File Name: whatever.cfg
  • Click Download
  • Config file will be loaded onto the device, applied and system reset
• Apply config via command line interface
  • transfer download datatype config
  • transfer download mode tftp
  • transfer download serverip 192.168.1.11
  • transfer download path .
  • transfer download filename AIR-CT2500-K9-7-6-110-0.aes
  • transfer download start