Firmware Update FortiGate 100D

• Connect to the Console Port, just like to a Cisco device
• Connect the MGMT port to your network
• Put the system image file you wich to install in your TFTP server's root directory
• Turn on the device
• When you see the message Press any key to display configuration menu..., hit the [SPACE] bar
• Type [C] to Configure TFTP parameters.
  • Type [I] to set the local IP address to a free address on your network
  • Type [S] to set the local subnet mask
  • Type [T] to set the remote TFTP server IP address
  • Type [F] to set the firmware image file name (the one you put on your TFTP server), e. g. FGT_100D-v500-build4429-FORTINET.out
  • Type [R] to review the TFTP parameters.
  • If everything is OK, type [Q] to quit this menu.
• Type [T] to initiate the TFTP firmware transfer.