Applying a configuration file to a 25XX WLAN controller

• General Assunption: Device is unconfigured
• Connect device to serial console
• Connect device to network (port 1)
• Finish basic config wizard on console as described here
• Connect to device's static IP address via https
• Log in using credentials used in config wizard
• Click Advanced in top left corner
• Click Commands, then Download File
  • File Type: Configuration
  • Configuration File Encryption: No
  • Transfer Mode: TFTP
  • IP Address: 192.168.1.11
  • Maximum retries: 10
  • Timeout (seconds): 6
  • File Path: /
  • File Name: whatever.cfg