Applying a configuration file to a 25XX WLAN controller

From NesevoWiki
Revision as of 16:15, 11 March 2015 by Philipp (talk | contribs)
Jump to navigationJump to search
  • General Assunption: Device is unconfigured
  • Connect device to serial console
  • Connect device to network (port 1)
  • Finish basic config wizard on console as described here
  • Connect to device's static IP address via https
  • Log in using credentials used in config wizard
  • Click Advanced in top left corner
  • Click Commands, then Download File
    • File Type: Configuration
    • Configuration File Encryption: No
    • Transfer Mode: TFTP
    • IP Address: 192.168.1.11
    • Maximum retries: 10
    • Timeout (seconds): 6
    • File Path: /
    • File Name: whatever.cfg
Retrieved from "http://wiki.nesevo.com/index.php?title=Applying_a_configuration_file_to_a_25XX_WLAN_controller&oldid=2653"