Difference between revisions of "Upgrading Firmware on Opengear CM4200 Series Console Servers"
From NesevoWiki
Jump to navigationJump to search (Created page with "* Connect to the device's serial console port like explained here: Cabling_and_Configuring_Opengear_CM4148#Cabling_2 * Connect the device's network port ''NETWORK 1'' to y...") |
|||
| Line 6: | Line 6: | ||
* On the web interface, login with the same credentials as above | * On the web interface, login with the same credentials as above | ||
* Click ''System''→''Firmware'' | * Click ''System''→''Firmware'' | ||
| + | * Select the firmware image file and click ''Apply'' | ||
| + | * Wait for the upgrade process to finish | ||
Revision as of 11:28, 8 March 2016
- Connect to the device's serial console port like explained here: Cabling_and_Configuring_Opengear_CM4148#Cabling_2
- Connect the device's network port NETWORK 1 to your network. There must be a DHCP server running.
- On the serial console, log in with user name
rootand passworddefault - Type the command
ifconfigand check the IP address that was assigned to interfaceeth0(that's NETWORK 1) through DHCP. - Open that IP address in a browser over https.
- On the web interface, login with the same credentials as above
- Click System→Firmware
- Select the firmware image file and click Apply
- Wait for the upgrade process to finish
