Difference between revisions of "Getting and Applying License Files to ASA Firewalls"

Revision as of 10:24, 25 August 2016

Obtain the license files in the same way as with Nexus Switches (One exception: On the ASA, you get the Serial No with the command show version, the command show license host-id does not exist here.)
From the .lic file, copy the long string that looks somewhat like this to the clipboard: a63ed956 087a5836 a1f0f5ac e3fcbcdc 4723cdb1
On the ASA, switch to enable mode and then type conf t
Apply the license using the following command: activation-key a63ed956 087a5836 a1f0f5ac e3fcbcdc 4723cdb1
Check if the license has been applied correctly using the sho ver command

@@ Line 1: / Line 1: @@
-* Obtain the license files in the [[Getting and Applying License Files to Nexus 7000 / Nexus 5000 Switches|same way as with Nexus Switches]]
+* Obtain the license files in the [[Getting and Applying License Files to Nexus 7000 / Nexus 5000 Switches|same way as with Nexus Switches]] (One exception: On the ASA, you get the Serial No with the command <code>show version</code>, the command <code>show license host-id</code> does not exist here.)
 * From the <code>.lic</code> file, copy the long string that looks somewhat like this to the clipboard: <code>a63ed956 087a5836 a1f0f5ac e3fcbcdc 4723cdb1</code>
 * On the ASA, switch to <code>enable</code> mode and then type <code>conf t</code>
 * Apply the license using the following command: <code>activation-key a63ed956 087a5836 a1f0f5ac e3fcbcdc 4723cdb1</code>
 * Check if the license has been applied correctly using the <code>sho ver</code> command