View source for Getting and Applying License Files to ASR 1001 Routers

'''The same procedure applies to many more Cisco router series, e.g. the 1900 series routers. The drive names my be different, though (e.g. ''usbflash0'' instead of ''bootflash'', ''usbflash1'' instead of ''usb1'')'''

* Obtain the license files in the [[Getting and Applying License Files to Nexus 7000 / Nexus 5000 Switches|same way as with Nexus Switches]] (One exception: On the ASR, you get the Serial and UDI No with the command <code>show license udi</code>, the command <code>show license host-id</code> does not exist here.)
* Copy the <code>.lic</code> file to a USB thumb drive and insert the drive into the ASR's USB port.
* On the ASR, switch to <code>enable</code> and copy the <code>.lic</code> file to the bootflash drive: <code>copy usb1: bootflash:</code>
* Apply the license using the following command: <code>license install bootflash:<filename>.lic</code>
* Check if the license has been applied correctly using the <code>sho license</code> command