Applying a configuration file to a Fortinet FortiAnalyzer device

From NesevoWiki
Jump to: navigation, search


  • General assumption: The device is configured according to factory defaults.
  • Connect to the serial console of the device (just like to a Cisco device, same serial port settings)
  • Log in using username admin and no password (just hit ENTER).
  • Connect your computer's network port to network port 1 of the device. Configure your computer's NIC to use a static IP address in the 192.168.1.0/24 subnet (e.g. 192.168.1.100/255.255.255.0).
  • Access the device's web interface on https://192.168.1.99 and log in with the same credentials as above.

TBD