Testing your GBIC per ping

From NesevoWiki
Revision as of 10:36, 11 September 2008 by Florian (talk | contribs) (New page: '''Step 1:''' Enter the configuration mode. <br/><br/> '''Step 2:''' Type '''interface vlan1''' in. <br/><br/> '''Step 3:''' Now you can award a ip address. Type following in '''ip address...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Step 1: Enter the configuration mode.

Step 2: Type interface vlan1 in.

Step 3: Now you can award a ip address. Type following in ip address [Ip- Address][Subnetmask].

Step 4: Activate the settings with no shutdown.

Step 5: Leave this mode with exit.

Step 7: Enter the GBIC interface. Type interface gigabit 0/1 or 0/2 in to get on the GBICs.

Step 8: Activate the interface with no shutdown.

Step 9: Go back to the priveligate mode.

Step 10: Type ping <destination- IP- Address> to send echos to the other GBIC.

Retrieved from "http://wiki.nesevo.com/index.php?title=Testing_your_GBIC_per_ping&oldid=523"