Difference between revisions of "Password recovery & checking / installing licenses"
From NesevoWiki
Jump to navigationJump to search| Line 5: | Line 5: | ||
* View current and available model specifications; enter the show hardware spec command: | * View current and available model specifications; enter the show hardware spec command: | ||
<br> | <br> | ||
| − | amnesiac (config) # show hardware spec | + | <code>amnesiac (config) # show hardware spec</code> |
Spec Description | Spec Description | ||
| Line 16: | Line 16: | ||
* = active | * = active | ||
<br> | <br> | ||
| − | * | + | * Install the model upgrade license; enter the license install <license-key> command:<code>license install LIC-EXAMPLE-EX760H-0000-0000-0-000X-0XX0</code> |
* now search for the entry which starts with <code>IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is xxxx-xxxx-xxxx</code> | * now search for the entry which starts with <code>IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is xxxx-xxxx-xxxx</code> | ||
* the <code>xxxx-xxxx-xxxx</code> part is the Base Mac-adress of the device | * the <code>xxxx-xxxx-xxxx</code> part is the Base Mac-adress of the device | ||
Revision as of 12:53, 21 December 2017
- Connect to the Riverbed CLI
- Enter enable mode; at the system prompt, enter the enable command:
amnesiac > enable - Enter configuration mode; at the system prompt, enter the configure terminal command:
amnesiac # configure terminal - View current and available model specifications; enter the show hardware spec command:
amnesiac (config) # show hardware spec
Spec Description - ------ ---------------------------------------------------------------------- EX760L BW Limit: 10000 Kb/s Connection Limit: 900 EX760M BW Limit: 10000 Kb/s Connection Limit: 1500 (activation requires license) EX760H BW Limit: 20000 Kb/s Connection Limit: 2300 (activation requires license)
* = active
- Install the model upgrade license; enter the license install <license-key> command:
license install LIC-EXAMPLE-EX760H-0000-0000-0-000X-0XX0 - now search for the entry which starts with
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is xxxx-xxxx-xxxx - the
xxxx-xxxx-xxxxpart is the Base Mac-adress of the device
