Difference between revisions of "Password recovery & checking / installing licenses"
From NesevoWiki
Jump to navigationJump to search| Line 8: | Line 8: | ||
Spec Description | Spec Description | ||
| − | + | - ------ ---------------------------------------------------------------------- | |
| − | EX760L BW Limit: 10000 Kb/s Connection Limit: 900 | + | EX760L BW Limit: 10000 Kb/s Connection Limit: 900 |
| − | EX760M BW Limit: 10000 Kb/s Connection Limit: 1500 | + | EX760M BW Limit: 10000 Kb/s Connection Limit: 1500 |
| − | (activation requires license) | + | (activation requires license) |
| − | EX760H BW Limit: 20000 Kb/s Connection Limit: 2300 | + | EX760H BW Limit: 20000 Kb/s Connection Limit: 2300 |
(activation requires license)<br> | (activation requires license)<br> | ||
* = active | * = active | ||
Revision as of 12:51, 21 December 2017
- Connect to the Riverbed CLI
- Enter enable mode; at the system prompt, enter the enable command:
amnesiac > enable - Enter configuration mode; at the system prompt, enter the configure terminal command:
amnesiac # configure terminal - View current and available model specifications; enter the show hardware spec command:
amnesiac (config) # show hardware spec
Spec Description - ------ ---------------------------------------------------------------------- EX760L BW Limit: 10000 Kb/s Connection Limit: 900 EX760M BW Limit: 10000 Kb/s Connection Limit: 1500 (activation requires license) EX760H BW Limit: 20000 Kb/s Connection Limit: 2300 (activation requires license)
* = active
- this will give out a huge diagnostic report, some seconds after the section
=====display interface====appears, stop the output by pressingCTRL + C - now search for the entry which starts with
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is xxxx-xxxx-xxxx - the
xxxx-xxxx-xxxxpart is the Base Mac-adress of the device
