Difference between revisions of "Password Recovery for Nexus Switches"
From NesevoWiki
Jump to navigationJump to search (Created page with "* Connect to the Nexus switch via serial console * Power on the device * During system bootup, type <code>Ctrl-]</code> (Ctrl-Key and right square bracket, that's Strg + Alt G...") |
|||
| Line 1: | Line 1: | ||
* Connect to the Nexus switch via serial console | * Connect to the Nexus switch via serial console | ||
* Power on the device | * Power on the device | ||
| − | * During system bootup, type <code>Ctrl-]</code> (Ctrl-Key and right square bracket, that's Strg + Alt Gr + 9 on german | + | * During system bootup, type <code>Ctrl-]</code> (Ctrl-Key and right square bracket, that's Strg + Alt Gr + 9 on german keyboards) multiple times and wait until you get to the <code>switch(boot)#</code> prompt. |
* Type <code>admin-password Ad123min</code> | * Type <code>admin-password Ad123min</code> | ||
| + | * Type <code>dir bootflash:</code> to view bootflash content | ||
| + | * Boot the system image, for example <code>load bootflash:n5000-uk9.5.1.3.N2.1b.bin</code> | ||
| + | * Enter the switch with username <code>admin</code> and Password <code>Ad123min</code> | ||
Revision as of 13:23, 27 March 2014
- Connect to the Nexus switch via serial console
- Power on the device
- During system bootup, type
Ctrl-](Ctrl-Key and right square bracket, that's Strg + Alt Gr + 9 on german keyboards) multiple times and wait until you get to theswitch(boot)#prompt. - Type
admin-password Ad123min - Type
dir bootflash:to view bootflash content - Boot the system image, for example
load bootflash:n5000-uk9.5.1.3.N2.1b.bin - Enter the switch with username
adminand PasswordAd123min
