Difference between revisions of "Password Recovery for Cisco ASA 5500 Series"
From NesevoWiki
Jump to navigationJump to search| Line 8: | Line 8: | ||
rommon #1> confreg | rommon #1> confreg | ||
| + | |||
| + | The security appliance displays the current configuration register value, and asks if you want to change the value: | ||
| + | |||
| + | Current Configuration Register: 0x00000011 | ||
| + | |||
| + | Configuration Summary: | ||
Revision as of 11:34, 11 May 2010
Step 1 Connect to the security appliance console port according to the "Accessing the Command-Line Interface".
Step 2 Power off the security appliance, and then power it on.
Step 3 During the startup messages, press the Escape key when prompted to enter ROMMON.
Step 4 To set the security appliance to ignore the startup configuration at reload, enter the following command:
rommon #1> confreg
The security appliance displays the current configuration register value, and asks if you want to change the value:
Current Configuration Register: 0x00000011
Configuration Summary:
