Difference between revisions of "Main Page"

From NesevoWiki
Jump to navigationJump to search
Line 83: Line 83:
 
** [https://supportforums.cisco.com/docs/DOC-29251 Cisco Support Forum] (Step-by-Step)
 
** [https://supportforums.cisco.com/docs/DOC-29251 Cisco Support Forum] (Step-by-Step)
 
** [http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-2/rommon/configuration/guide/rm42recv.html Official Cisco Documentation]
 
** [http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-2/rommon/configuration/guide/rm42recv.html Official Cisco Documentation]
 +
* In short
 +
** Connect to the Console Port
 +
** Get to ROMMON prompt (sometimes you have to hit CTRL-C whan asked)
 +
** Connect Mgmt0 port to the network
 +
** Place the ''vm'' File of your ASR IOSXR distribution (e.g. @@asr9k-mini-px.vm-4.3.0@@, normally found within the tar file of your distribution) onto your TFTP server
 +
** Issue the following commands from the ROMMON promt (bold values may have to be replaced acording to your environment):
 +
          unset BOOT
 +
          unset TFTP_FILE
 +
          sync
 +
          unset BOOT_DEV_SEQ_OPER
 +
          unset MIRROR_ENABLE
 +
          sync
 +
          priv
 +
          diswd
 +
          IP_ADDRESS='''192.168.1.241'''
 +
          IP_SUBNET_MASK='''255.255.255.0'''
 +
          DEFAULT_GATEWAY='''192.168.1.254'''
 +
          TFTP_RETRY_COUNT=4
 +
          TFTP_TIMEOUT=6000
 +
          TFTP_CHECKSUM=1
 +
          TFTP_SERVER='''192.168.1.11'''
 +
          TFTP_MGMT_INTF=0
 +
          TFTP_BLKSIZE=1400
  
 
=== Cisco 2600 series routers ===
 
=== Cisco 2600 series routers ===

Revision as of 14:14, 7 March 2014

Help

You can read the introduction to MediaWiki Syntax in german or english. Additionally, you can consult the help pages provided by the WikiMedia Foundation and by mediawiki.org, the developers of this software. There's also help regarding the transformation of Microsoft Office documents (german).

Resetting / changing passwords

Loading IOS

Telling the difference

Power supply

RPS / Redundant Power System

Power cables and power cable connectors overview

Cisco routers

Cisco ASR 1000 series

Cisco ASR 9000 series

  • Installing IOS from ROMMON
  • In short
    • Connect to the Console Port
    • Get to ROMMON prompt (sometimes you have to hit CTRL-C whan asked)
    • Connect Mgmt0 port to the network
    • Place the vm File of your ASR IOSXR distribution (e.g. @@asr9k-mini-px.vm-4.3.0@@, normally found within the tar file of your distribution) onto your TFTP server
    • Issue the following commands from the ROMMON promt (bold values may have to be replaced acording to your environment):
         unset BOOT
         unset TFTP_FILE
         sync
         unset BOOT_DEV_SEQ_OPER
         unset MIRROR_ENABLE
         sync
         priv
         diswd
         IP_ADDRESS=192.168.1.241
         IP_SUBNET_MASK=255.255.255.0
         DEFAULT_GATEWAY=192.168.1.254
         TFTP_RETRY_COUNT=4
         TFTP_TIMEOUT=6000
         TFTP_CHECKSUM=1
         TFTP_SERVER=192.168.1.11
         TFTP_MGMT_INTF=0
         TFTP_BLKSIZE=1400

Cisco 2600 series routers

Cisco 7200 series routers

Cisco 7600 series routers

Cisco switches

Cisco 6500 series switches

Cisco Nexus Switches

Nexus N5K-C5000 series switches

Nexus N5K-C5548P-FA and N5K-C5548UP-FA switches

Nexus N2K-C2000 series switches

Nexus N2K-C2248TP and N2K-C2248TP-E switches

there are two different options for the N2K-C2248 nexus switch. The standard version (N2K-C2248TP / N2K-C2248TP-1GE) and an enhanced version (N2K-C2248TP-E / N2K-C2248TP-E-1GE). the difference is the buffer memory size of 32MB for the enhanced version.
both versions appear with two partnumbers basically describing the same part.
the config partnumers leaving you the airflow options (N2K-C2248TP / N2K-C2248TP-E) and the chassis partnumbers (N2K-C2248TP-1GE / N2K-C2248TP-E-1GE):
N2K-C2248TP = N2K-C2248TP-1GE (48x100/1000-T+4x10GE), airflow/power option
N2K-C2248TP-E = N2K-C2248TP-E-1GE (48x100/1000-T+4x10GE), airflow/power option

supervisor engines (SUP) / route switch processors (RSP) / performance route processors (PRP)

WS-X6K-S2U-MSFC2

WS-SUP720-3BXL

WS-SUP720-3B

WS-SUP32-GE-3B

Catalyst 6500 / Cisco7600 series Ethernet Module Daughter Cards

System Software Conversion from CatOS to Cisco IOS for Catalyst 6500/6000 Switches

Cisco NM-cards / network modules

Cisco GSR

Cisco GSR Linecards

Cisco GSR processor cards

Cisco transceivers

CWDM / DWDM

DWDM transceivers (DWDM SFP, DWDM XFP, DWDMXENPAK, DWDM X2)

cables / cisco cables

Cisco IP Phones

PIX Firewalls and ASA adaptive security application platforms

PIX

ASA

Test and ASA Adaptive security

Miscellaneous

Nesevo Lab

CCNA / CCNP


Cisco BPX 8600

Applying Licenses

Getting and Applying License Files to Nexus 7000 / Nexus 5000 Switches

Opengear Console Server

Opengear CM4148