Difference between revisions of "Main Page"

From NesevoWiki
Jump to navigationJump to search
(49 intermediate revisions by 3 users not shown)
Line 5: Line 5:
 
* [[Password Recovery Procedure for Cisco Routers]]
 
* [[Password Recovery Procedure for Cisco Routers]]
 
* [[Password Recovery Procedure for Cisco Switches]]
 
* [[Password Recovery Procedure for Cisco Switches]]
 +
* [[Password Recovery Procedure for Cisco Access Points]]
 
* [[Password Recovery Procedure for Cisco Secure Pix]]
 
* [[Password Recovery Procedure for Cisco Secure Pix]]
 
* [[Standard Break Key Sequence Combinations During Password Recovery]]
 
* [[Standard Break Key Sequence Combinations During Password Recovery]]
 
* [[Password Recovery Procedure for the Catalyst 6500 with Supervisor 720 (WS-SUP720 / WS-SUP720-3B / WS-SUP720-3BXL) Running Cisco IOS Software Prior to 12.2(17)SX]]
 
* [[Password Recovery Procedure for the Catalyst 6500 with Supervisor 720 (WS-SUP720 / WS-SUP720-3B / WS-SUP720-3BXL) Running Cisco IOS Software Prior to 12.2(17)SX]]
 
* [[Password Recovery for Cisco ASA 5500 Series]]
 
* [[Password Recovery for Cisco ASA 5500 Series]]
 +
* [[Password Recovery for Nexus Switches]]
 +
* [[Password Recovery for Aironet Access Points]]
 +
* [[Password Recovery for Juniper EX Series Switches]]
  
 
== Loading IOS ==
 
== Loading IOS ==
 
* [[Loading IOS on a Switch or Router]]
 
* [[Loading IOS on a Switch or Router]]
 +
* [[Installing IOS in .tar format on a Catalyst Switch]]
 
* [[Loading IOS from a Switch or Router to your PC]]
 
* [[Loading IOS from a Switch or Router to your PC]]
 
* [[Loading IOS on a switch or router via the console]]
 
* [[Loading IOS on a switch or router via the console]]
Line 19: Line 24:
 
* [[Loading IOS on ASA devices (e.g. ASA5510)]]
 
* [[Loading IOS on ASA devices (e.g. ASA5510)]]
 
* [[Loading IOS on Access Server (e.g. AS2509-RJ, AS2511-RJ)]]
 
* [[Loading IOS on Access Server (e.g. AS2509-RJ, AS2511-RJ)]]
 +
* [[Loading IOS on a WS-C3850 Switch]]
 +
* [[Loading IOS on a WS-C2960X Switch Stack]]
 
* [[Loading IOS on a Nexus 7000/5000]]
 
* [[Loading IOS on a Nexus 7000/5000]]
 +
* [[Loading IOS on a 25XX WLAN Controller]]
 +
* [[Loading IOS on an ASR 1001 Router]]
 +
* [[Loading IOS on an ASR 9001 Router]]
 +
* [[Loading IOS on a WS-X45-SUP7L-E from ROMMON]]
 +
* [[Loading IOS-XE on a C9300 Stack]]
 +
 +
== Loading JunOS ==
 +
* [[Loading JunOS on an MX series router]]
 +
* [[Loading JunOS on an MX series router|Loading JunOS on SRX series devices]]
 +
* [[Loading JunOS on an EX series switch]]
 +
 +
== Boot Failure Recovery ==
 +
* Boot failure recovery due to missing or corrupt IOS image
 +
** Method 1: [[Loading IOS on a switch or router via the console|load correct IOS via console cable from ''switch:'' prompt]]
 +
** Method 2: [[Boot Cisco Devices via tftp|boot via tftp from ''rommon>'' prompt]]
  
 
== Telling the difference ==
 
== Telling the difference ==
Line 62: Line 84:
 
* [[general overview on power cable connectors]]
 
* [[general overview on power cable connectors]]
 
* [[cisco power cable partnumbers and their connectors]]
 
* [[cisco power cable partnumbers and their connectors]]
* [[matching power cables for cisco powersupplies]]
+
* [[connector matrix for cisco powersupplies]]
 +
* [[power cable diameter matrix]]
  
 
== Cisco routers ==
 
== Cisco routers ==
Line 83: Line 106:
 
** [https://supportforums.cisco.com/docs/DOC-29251 Cisco Support Forum] (Step-by-Step)
 
** [https://supportforums.cisco.com/docs/DOC-29251 Cisco Support Forum] (Step-by-Step)
 
** [http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-2/rommon/configuration/guide/rm42recv.html Official Cisco Documentation]
 
** [http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r4-2/rommon/configuration/guide/rm42recv.html Official Cisco Documentation]
* In short
+
** [[Install ASR9k IOS from ROMMON via TFTP|Quick copy&paste guide, for the impatient]]
** Connect to the Console Port
 
** Get to ROMMON prompt (sometimes you have to hit CTRL-C whan asked)
 
** Connect Mgmt0 port to the network
 
** Place the ''vm'' File of your ASR IOSXR distribution (e.g. @@asr9k-mini-px.vm-4.3.0@@, normally found within the tar file of your distribution) onto your TFTP server
 
** Issue the following commands from the ROMMON promt, line by line (bold values may have to be replaced acording to your environment):
 
unset BOOT
 
unset TFTP_FILE
 
sync
 
unset BOOT_DEV_SEQ_OPER
 
unset MIRROR_ENABLE
 
sync
 
priv
 
diswd
 
IP_ADDRESS='''192.168.1.241'''
 
IP_SUBNET_MASK='''255.255.255.0'''
 
DEFAULT_GATEWAY='''192.168.1.254'''
 
TFTP_RETRY_COUNT=4
 
TFTP_TIMEOUT=6000
 
TFTP_CHECKSUM=1
 
TFTP_SERVER='''192.168.1.11'''
 
TFTP_MGMT_INTF=0
 
TFTP_BLKSIZE=1400
 
TURBOBOOT=on,disk0,format
 
sync
 
** Now, boot and install via TFTP
 
boot tftp://192.168.1.11/asr9k-mini-px.vm-4.3.0
 
** Wait without hitting any key until the ASR reboots. May take quite long, 30 mins or so.
 
** Issue <code>show install active</code> and check the path starts with '''disk0:''' and not '''mem:'''. If it starts with '''mem:''', you have to repeat the whole procedure.
 
  
 
=== Cisco 2600 series routers ===
 
=== Cisco 2600 series routers ===
Line 274: Line 269:
 
== Applying Licenses ==
 
== Applying Licenses ==
  
[[Getting and Applying License Files to Nexus 7000 / Nexus 5000 Switches]]
+
* [[Getting and Applying License Files to Nexus 7000 / Nexus 5000 Switches]]
 +
* [[Getting and Applying License Files to ASA Firewalls]]
 +
* [[Getting and Applying License Files to ASR 1001 Routers]]
 +
* [[Getting and Applying License Files to ASR 1001 Routers|Getting and Applying License Files to 1900 Series Routers]]
 +
* [[Applying a License to a Juniper EX Series Switch]]
 +
 
 +
== Applying Configuration Files ==
 +
 
 +
* [[Applying a configuration file to a 25XX WLAN controller]]
 +
* [[Applying a configuration file to a AIRONET WLAN Access Point]]
 +
* [[Applying a configuration file to a Fortinet Fortigate Firewall]]
 +
* [[Loading a configuration onto a JunOS device]]
  
 
== Opengear Console Server ==
 
== Opengear Console Server ==
 
=== Opengear CM4148 ===
 
=== Opengear CM4148 ===
 
* [[Cabling and Configuring Opengear CM4148]]
 
* [[Cabling and Configuring Opengear CM4148]]
 +
=== Opengear IM4200 Series ===
 +
* [[Upgrading Firmware on Opengear CM4200 Series Console Servers]]
 +
 +
== Fortinet Devices ==
 +
* Performing a firmware upgrade
 +
** Detailed instructions: see [http://kb.fortinet.com/kb/viewContent.do?externalId=10338 Fortinet knowledge base]
 +
** [[Firmware Update FortiGate 100D|Quick Guide for FortiGate 100D]]
 +
** [[Firmware Update FortiAnalyzer 200D|Quick Guide for FortiAnalyzer 200D]]
 +
* Applying a configuration file
 +
** [[Applying a configuration file to a Fortinet Fortigate Firewall|to a Fortinet Fortigate Firewall]]
 +
** [[Applying a configuration file to a Fortinet FortiAnalyzer device|to a Fortinet FortiAnalyzer device]]
 +
 +
== Huawei Devices ==
 +
=== S2700-52P-EI-AC ===
 +
* [[checking the MAC adress via console]]
 +
 +
== Riverbed Devices ==
 +
=== SHA-01050-H Steelhead ===
 +
* [[password recovery & checking / installing licenses]]
 +
 +
== Racks ==
 +
=== Minkels ===
 +
* [[Minkels Rack Lock Code Reset|Lock Code Reset]]

Revision as of 15:51, 23 October 2019

Help

You can read the introduction to MediaWiki Syntax in german or english. Additionally, you can consult the help pages provided by the WikiMedia Foundation and by mediawiki.org, the developers of this software. There's also help regarding the transformation of Microsoft Office documents (german).

Resetting / changing passwords

Loading IOS

Loading JunOS

Boot Failure Recovery

Telling the difference

Power supply

RPS / Redundant Power System

Power cables and power cable connectors overview

Cisco routers

Cisco ASR 1000 series

Cisco ASR 9000 series

Cisco 2600 series routers

Cisco 7200 series routers

Cisco 7600 series routers

Cisco switches

Cisco 6500 series switches

Cisco Nexus Switches

Nexus N5K-C5000 series switches

Nexus N5K-C5548P-FA and N5K-C5548UP-FA switches

Nexus N2K-C2000 series switches

Nexus N2K-C2248TP and N2K-C2248TP-E switches

there are two different options for the N2K-C2248 nexus switch. The standard version (N2K-C2248TP / N2K-C2248TP-1GE) and an enhanced version (N2K-C2248TP-E / N2K-C2248TP-E-1GE). the difference is the buffer memory size of 32MB for the enhanced version.
both versions appear with two partnumbers basically describing the same part.
the config partnumers leaving you the airflow options (N2K-C2248TP / N2K-C2248TP-E) and the chassis partnumbers (N2K-C2248TP-1GE / N2K-C2248TP-E-1GE):
N2K-C2248TP = N2K-C2248TP-1GE (48x100/1000-T+4x10GE), airflow/power option
N2K-C2248TP-E = N2K-C2248TP-E-1GE (48x100/1000-T+4x10GE), airflow/power option

supervisor engines (SUP) / route switch processors (RSP) / performance route processors (PRP)

WS-X6K-S2U-MSFC2

WS-SUP720-3BXL

WS-SUP720-3B

WS-SUP32-GE-3B

Catalyst 6500 / Cisco7600 series Ethernet Module Daughter Cards

System Software Conversion from CatOS to Cisco IOS for Catalyst 6500/6000 Switches

Cisco NM-cards / network modules

Cisco GSR

Cisco GSR Linecards

Cisco GSR processor cards

Cisco transceivers

CWDM / DWDM

DWDM transceivers (DWDM SFP, DWDM XFP, DWDMXENPAK, DWDM X2)

cables / cisco cables

Cisco IP Phones

PIX Firewalls and ASA adaptive security application platforms

PIX

ASA

Test and ASA Adaptive security

Miscellaneous

Nesevo Lab

CCNA / CCNP


Cisco BPX 8600

Applying Licenses

Applying Configuration Files

Opengear Console Server

Opengear CM4148

Opengear IM4200 Series

Fortinet Devices

Huawei Devices

S2700-52P-EI-AC

Riverbed Devices

SHA-01050-H Steelhead

Racks

Minkels