Difference between revisions of "Loading JunOS on an MX series router"

From NesevoWiki
Jump to navigationJump to search
(Created page with "* See JunOS knowledge base: https://kb.juniper.net/InfoCenter/index?page=content&id=KB11409")
 
Line 1: Line 1:
 
* See JunOS knowledge base: https://kb.juniper.net/InfoCenter/index?page=content&id=KB11409
 
* See JunOS knowledge base: https://kb.juniper.net/InfoCenter/index?page=content&id=KB11409
 +
* Put the <code>jinstall-*.tgz</code> file on a FAT32 formatted USB drive and place it in the router's USB port
 +
* Connect to the router's console as <code>root</code> user
 +
* Start a shell session: <code>start shell</codde>
 +
* Create a temporary folder and mount the USB drive:
 +
** <code>mkdir /mnt/usb</code>
 +
** <code>mount -t msdosfs /dev/da1s1 /mnt/usb</code>
 +
* Copy the <code>jinstall</code> file to the local file system: <code>cp /mnt/usb/jinstall-ppc-14.2R7.5-domestic-signed.tgz /var/tmp/</code>
 +
* Unmount the USB drive and disconnect it: <code>umount /mnt/usb</code>

Revision as of 17:52, 19 December 2016

  • See JunOS knowledge base: https://kb.juniper.net/InfoCenter/index?page=content&id=KB11409
  • Put the jinstall-*.tgz file on a FAT32 formatted USB drive and place it in the router's USB port
  • Connect to the router's console as root user
  • Start a shell session: start shell</codde>
  • Create a temporary folder and mount the USB drive:
    • mkdir /mnt/usb
    • mount -t msdosfs /dev/da1s1 /mnt/usb
  • Copy the jinstall file to the local file system: cp /mnt/usb/jinstall-ppc-14.2R7.5-domestic-signed.tgz /var/tmp/
  • Unmount the USB drive and disconnect it: umount /mnt/usb
Retrieved from "http://wiki.nesevo.com/index.php?title=Loading_JunOS_on_an_MX_series_router&oldid=2737"