Difference between revisions of "Loading JunOS on an EX series switch"
From NesevoWiki
Jump to navigationJump to search| Line 1: | Line 1: | ||
| − | The | + | The procedure of loading JunOS on an EX series (or ACX series) switch is exactly the same as [[Loading JunOS on an MX series router]], with one exception: |
* As <code>/mnt</code> is a read-only file-system on EX switches, you have to mount the USB thumb drive under <code>/tmp/usb</code> instead | * As <code>/mnt</code> is a read-only file-system on EX switches, you have to mount the USB thumb drive under <code>/tmp/usb</code> instead | ||
Latest revision as of 11:52, 22 December 2020
The procedure of loading JunOS on an EX series (or ACX series) switch is exactly the same as Loading JunOS on an MX series router, with one exception:
- As
/mntis a read-only file-system on EX switches, you have to mount the USB thumb drive under/tmp/usbinstead
If you get annoying messages about failing auto-image upgrade, do the following to disable them.
- Go to configure mode:
root> configure - Set a root password (otherwise you cannot commit changes):
root# set system root-authentication plain-text-password(UseCisco123as password) - Disable auto-upgrade:
root# delete chassis auto-image-upgrade - Commit changes and exit:
root# commit and-quit
