Difference between revisions of "Loading IOS on a switch or router via the console"
From NesevoWiki
Jump to navigationJump to search| Line 1: | Line 1: | ||
'''''If the flash has been deleted / formated and there is no IOS on the switch or router, you have to copy the new IOS via the console port. this article explains the procedure using teraterm'''''<br/><br/> | '''''If the flash has been deleted / formated and there is no IOS on the switch or router, you have to copy the new IOS via the console port. this article explains the procedure using teraterm'''''<br/><br/> | ||
| − | + | ''rommon 1 >'' '''''xmodem -c filename.bin''''' | |
<br/> | <br/> | ||
''Do not start the sending program yet...''<br/> | ''Do not start the sending program yet...''<br/> | ||
| Line 13: | Line 13: | ||
Ready to receive file filename.bin ...<br/> | Ready to receive file filename.bin ...<br/> | ||
<br/> | <br/> | ||
| − | + | now send file by clicking on the top menu: '''file-> transfer-> send-> xmodem''' - and chose the file from your local directory<br/> | |
Revision as of 15:10, 24 January 2011
If the flash has been deleted / formated and there is no IOS on the switch or router, you have to copy the new IOS via the console port. this article explains the procedure using teraterm
rommon 1 > xmodem -c filename.bin
Do not start the sending program yet...
File size Checksum File name
18699016 bytes (0x11d5308) 0x7234 c2600-is-mz.122-15.ZJ2.bin (bad checksum: 0x6683)
WARNING: All existing data in bootflash will be lost!
Invoke this application only for disaster recovery.
Do you wish to continue? y/n [n]: y
Ready to receive file filename.bin ...
now send file by clicking on the top menu: file-> transfer-> send-> xmodem - and chose the file from your local directory
