Difference between revisions of "Loading IOS on a switch or router via the console"
From NesevoWiki
Jump to navigationJump to search| Line 4: | Line 4: | ||
<br/> | <br/> | ||
Do not start the sending program yet... | Do not start the sending program yet... | ||
| − | + | File size Checksum File name<br/> | |
| − | + | 18699016 bytes (0x11d5308) 0x7234 c2600-is-mz.122-15.ZJ2.bin (bad checksum: 0x6683)<br/> | |
| − | : 0x6683) | ||
WARNING: All existing data in bootflash will be lost! | WARNING: All existing data in bootflash will be lost! | ||
Revision as of 15:02, 24 January 2011
If the flash has been deleted / formated and there is no IOS on the switch or router, you have to copy the new IOS via the console port. this article explains the procedure using teraterm
rommon 1 > xmodem -c filename.bin
Do not start the sending program yet...
File size Checksum File name
18699016 bytes (0x11d5308) 0x7234 c2600-is-mz.122-15.ZJ2.bin (bad checksum: 0x6683)
WARNING: All existing data in bootflash will be lost!
Invoke this application only for disaster recovery.
Do you wish to continue? y/n [n]: 'y'
Ready to receive file filename.bin ...
now send file by clicking in file-> transfer-> xmodem
