Loading IOS on a WS-C4900M / loading IOS and configuring the management interface via VRF / virtual router forwarding

From NesevoWiki
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

1) configure an IP address on the management port

Switch>en
Switch#configure terminal
Switch(config-if)#interface FastEthernet1
Switch(config-if)#ip vrf forwarding mgmtVrf
Switch(config-if)#ip address 192.168.0.240 255.255.255.0
Switch(config-if)#speed auto
Switch(config-if)#duplex auto
Switch(config-if)#exit
Switch(config)#exit
Switch#

2) ping to check if it works

Switch#ping vrf mgmtVrf 192.168.0.127

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.0.127, timeout is 2 seconds: !!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
Switch#


3) configure the management port as source for the TFTP

Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#ip tftp source-interface FastEthernet1
Switch#exit
Switch#

4) copy the IOS

Switch#copy tftp: slot0:
Address or name of remote host [192.168.0.127]?
Source filename [XYZ]?
Destination filename [XYZ]?
Accessing tftp://192.168.0.127/XYZ

it should load now......

Retrieved from "http://wiki.nesevo.com/index.php?title=Loading_IOS_on_a_WS-C4900M_/_loading_IOS_and_configuring_the_management_interface_via_VRF_/_virtual_router_forwarding&oldid=1921"