Loading IOS on a WS-C3850 Switch
From NesevoWiki
Jump to navigationJump to searchThe printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
- Connect to the serial console
- Connect the Mgmt interface to your network
- Configure the Mgmt network interface (that's GigabitEthernet 0/0)
- Test connectivity:
ping vrf Mgmt-intf 192.168.1.11
orping vrf Mgmt-vrf 192.168.1.11
- Set Mgmt interface as interface to use for TFTP transfer:
conf t
ip tftp source-interface gigabitEthernet 0/0
exit
- Copy the
.bin
file toflash:
via TFTPcopy tftp: flash:
- Install the
.bin
file using this command:software install file flash:cat3k_caa-universalk9.SPA.03.07.01.E.152-3.E1.bin
- Answer yes when asked if you want to relaod the switch
- Answer no when asked if you want to save the configuration
- If you have a stack of 3850 switches, this only needs to be done on one stack member. The software will be upgraded on all stack members.
If downgrading from a newer IOS version, you may have to follow these instructions: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/16-3/release_notes/ol-16-3-3850.html#34555
In a nutshell:
- Configure network connectivity as above
- Clean old packages:
request platform software package clean switch all file flash:
(confirm with "y") - Copy new bin file from tftp server to flash
- Install (downgrade to) new bin file:
request platform software package install switch all file flash:whatever-filename.bin new auto-copy