Loading IOS on a WS-C2960X Switch Stack

From NesevoWiki
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
  • Connect ("daisy-chain") all stack members with stacking cables as shown here: WS-C2960X Stacking Guide
  • Power on all stack members
  • Connect one switch to your network (via the Mgmt interface)
  • Connect to the serial console of the same switch
  • Configure the Mgmt interface (FastEthernet 0)
  • Check connectivity: ping 192.168.1.11
  • Install the new IOS firmware on all stack mambers simultaneously using this command:
    • archive download-sw /force-reload /overwrite tftp://192.168.1.11/c2960x-universalk9-tar.150-2a.EX5.tar
  • Important: You must use the .tar version of the IOS image, the .bin version won't work with the archive download-sw command.
Retrieved from "http://wiki.nesevo.com/index.php?title=Loading_IOS_on_a_WS-C2960X_Switch_Stack&oldid=2685"