Firmware Update FortiAnalyzer 200D
From NesevoWiki
Jump to navigationJump to searchThe printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
- Connect to the Console Port, just like to a Cisco device
- Connect network port 1 to your network
- Put the system image file you wich to install in your TFTP server's root directory
- Turn on the device
- Caution: If you have a typo anywhere in this process, you have to start at zero.
- When you see the message Press any key to display configuration menu..., hit the [SPACE] bar
- Type [G] to get firmware image from TFTP server.
- Provide local IP address, TFTP server's IP address and system image file name when prompted
- When asked Save as Default firmware/Backup firmware/Run image without saving:[D/B/R]?, type [D]
- Wait for the device to restart and boot the new image
