Difference between revisions of "Delete / Erase / Change Password on Cisco 2600, 2800, 3600, 3700, 3800, series routers"
(New page: '''Step 1:''' Hit '''ctrl / break''' directly after powering up the router. <br/><br/> '''Step 2''': type: '''''confreg 0x2142''''' from rommon 1> <br/><br/> '''Step 3''': type: '''''re...) |
|||
| Line 21: | Line 21: | ||
'''Step 11:''' Type the '''no shutdown''' command on every interface that you use. | '''Step 11:''' Type the '''no shutdown''' command on every interface that you use. | ||
<br/><br/> | <br/><br/> | ||
| − | '''Step:'''Hit '''Ctrl / z" or '''end'''to leave the configuration mode. | + | '''Step 12:'''Hit '''Ctrl / z" or '''end'''to leave the configuration mode. |
<br/><br/> | <br/><br/> | ||
| − | '''Step:'''Type '''write memory''' or '''copy running-config startup-config''' to save the changes. | + | '''Step 13:'''Type '''write memory''' or '''copy running-config startup-config''' to save the changes. |
Latest revision as of 14:52, 28 July 2008
Step 1: Hit ctrl / break directly after powering up the router.
Step 2: type: confreg 0x2142 from rommon 1>
Step 3: type: reset from rommon 2>
Step 4: Would you like to enter the initial configuration dialog? [yes/no]: answer NO
Step 5: type: en from router>
Step 6: type: COPY STARTUP-CONFIG RUNNING-CONFIG from router#>
Step 7: type: SHOW RUNNING-CONFIG from router#>
Step 8: type: CONFIGURE TERMINAL from router#> to edit or remove any existing passwords enter Global Configuration
Step 9: Type enable secret <password> in order to change the enable secret password or type NO ENABLE SECRET to remove the secret from router(config)#>
Step 10: type: NO ENABLE PASSWORD to remove the password from router (config)#>
Step 11: Type the no shutdown command on every interface that you use.
Step 12:Hit Ctrl / z" or endto leave the configuration mode.
Step 13:Type write memory or copy running-config startup-config to save the changes.
