Difference between revisions of "Cisco 6503 and Cisco 6503-E"

From NesevoWiki
Jump to navigationJump to search
Line 49: Line 49:
 
==Fan trys ==
 
==Fan trys ==
 
'''Supported Fan trays in the 6503 series'''
 
'''Supported Fan trays in the 6503 series'''
−
*Standard Fan try
+
*Standard Fan tray
 
**FAN-MOD-3  
 
**FAN-MOD-3  
 
*High-speed fan tray
 
*High-speed fan tray
 
**FAN-MOD-3HS
 
**FAN-MOD-3HS
 
<br/>
 
<br/>
−
'''''Note''''' Both fan tray models contain four individual fans. The individual fans are not field replaceable; you must replace the fan tray.
+
'''''Note''''' The standard fan tray will only supports WS-X6K-S2-PFC2, WS-X6K-S2-MSFC2 and WS-X6K-S2U-MSFC2. Supervisor Engin 32 and 720 will need a high-speed fan tray
 
<br/><br/>
 
<br/><br/>
 
'''Supported Fan trays in the 6503-E series'''
 
'''Supported Fan trays in the 6503-E series'''
 
*WS-C6503-E-FAN
 
*WS-C6503-E-FAN
 
<br/>
 
<br/>
−
'''''Note''''' The fan tray contains four individual fans. The individual fans are not field replaceable; you must replace the fan tray.
 
−
<br/><br/>
 
  
 
==Power supplies and power entry modules==
 
==Power supplies and power entry modules==

Revision as of 10:13, 9 October 2008

Supervisor engines

Both, the Cisco6503 and the Cisco6503-E switch have three horizontal slots being numbered from 1 (top) to 3 (bottom)

Supported supervisor engines in the Cisco6503 switch

  • Supervisor Engine 32
    • WS-SUP32-GE-3B
    • WS-SUP32-10GE-3B
    • WS-S32-GE-PISA
    • WS-S32P-10GE-PISA


Note: Redundant supervisor engines must be configured identically.

Supported supervisor engines in the Cisco6503-E switch

  • Supervisor Engine 32
    • WS-SUP32-GE-3B
    • WS-SUP32-10GE-3B
    • WS-S32-GE-PISA
    • WS-S32P-10GE-PISA


Note: Redundant supervisor engines must be configured identically.

Fan trys

Supported Fan trays in the 6503 series

  • Standard Fan tray
    • FAN-MOD-3
  • High-speed fan tray
    • FAN-MOD-3HS


Note The standard fan tray will only supports WS-X6K-S2-PFC2, WS-X6K-S2-MSFC2 and WS-X6K-S2U-MSFC2. Supervisor Engin 32 and 720 will need a high-speed fan tray

Supported Fan trays in the 6503-E series

  • WS-C6503-E-FAN


Power supplies and power entry modules

Both, the Cisco 6503 and the Cisco 6503-E switch have two power supply slots on the back of the chassis, with the power supply 1 being installed on the bottom and the optional redundant power supply 2 being installed in the upper of the two slots.

Supported spower supplies in the Cisco 6503 switch

  • 950 W AC-input power supply
    • PWR-950-AC

!!! Note: the power entry module PEM-15A-AC is needed when using a PWR-950-AC. You need one PEM-15A-AC per PWR-950-AC.

  • 950 W DC-input power supply
    • PWR-950-DC

!!! Note: the power entry module PEM-DC/3 is needed when using a PWR-950-DC. You need one PEM-DC/3 per PWR-950-DC.

  • 1400 W AC-input power supply
    • PWR-1400-AC

!!! Note: the power entry module PEM-20A-AC+ is needed when using a PWR-1400-AC. You need one PEM-20A-AC+ per PWR-1400-AC.

Supported spower supplies in the Cisco 6503-E switch

  • 950 W AC-input power supply
    • PWR-950-AC

!!! Note: the power entry module PEM-15A-AC is needed when using a PWR-950-AC. You need one PEM-15A-AC per PWR-950-AC.

  • 950 W DC-input power supply
    • PWR-950-DC

!!! Note: the power entry module PEM-DC/3 is needed when using a PWR-950-DC. You need one PEM-DC/3 per PWR-950-DC.

  • 1400 W AC-input power supply
    • PWR-1400-AC

!!! Note: the power entry module PEM-20A-AC+ is needed when using a PWR-1400-AC. You need one PEM-20A-AC+ per PWR-1400-AC.

Retrieved from "http://wiki.nesevo.com/index.php?title=Cisco_6503_and_Cisco_6503-E&oldid=773"